Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Polls

View Poll Results: What are the total engine-hours on your Atomic 4?
More than 1,000 38 19.19%
More than 2,000 17 8.59%
More than 3,000 4 2.02%
More than 4,000 4 2.02%
More than 5,000 0 0%
More than 6,000 3 1.52%
No idea, but I'll bet it's a bunch! 132 66.67%
Voters: 198. You may not vote on this poll

Reply
 
Thread Tools Display Modes
  #26   IP: 24.5.197.134
Old 10-16-2009, 02:34 AM
tony201's Avatar
tony201 tony201 is offline
Senior Member
 
Join Date: Jan 2009
Location: Rodeo Calif.
Posts: 40
Thanks: 0
Thanked 0 Times in 0 Posts
engine hours

Rick I would think some where around 5000 hr. to ?

Tony
Reply With Quote
  #27   IP: 65.33.144.42
Old 10-16-2009, 05:21 AM
jhwelch's Avatar
jhwelch jhwelch is offline
Senior Member
 
Join Date: Dec 2005
Posts: 477
Thanks: 0
Thanked 6 Times in 6 Posts
The engine I took out of my boat last year, due to the rear seal having let go,
had just about 6,000 hours on it.

Perhaps Don can chime in on what he saw when he opened it up.

-jonathan
Reply With Quote
  #28   IP: 142.68.246.76
Old 10-17-2009, 05:58 AM
rigspelt's Avatar
rigspelt rigspelt is offline
Afourian MVP
 
Join Date: May 2008
Posts: 1,187
Thanks: 0
Thanked 19 Times in 17 Posts
Quote:
Originally Posted by jhwelch View Post
due to the rear seal having let go
jonathon, does that mean catastrophic failure, or slow leak slowly getting worse?
__________________
1974 C&C 27
Reply With Quote
  #29   IP: 65.33.144.42
Old 10-17-2009, 06:04 AM
jhwelch's Avatar
jhwelch jhwelch is offline
Senior Member
 
Join Date: Dec 2005
Posts: 477
Thanks: 0
Thanked 6 Times in 6 Posts
It was a slow leak that progressively got worse to the point where oil would
drip out overnight and I'd have to add a little bit every morning I was
motoring north up the ICW.

When the motor was opened up Don told me they found some interesting
worm-like erosion patterns, I think it was on the crankshaft, but he'll
have to clarify the exact location.
Reply With Quote
  #30   IP: 74.40.167.110
Old 10-17-2009, 09:24 AM
JimG JimG is offline
Senior Member
 
Join Date: Mar 2005
Location: Selma OR
Posts: 123
Thanks: 0
Thanked 3 Times in 3 Posts
I was told my engine had 250 hours on it when I bought it five years ago. Since then, I've but less than 50 hours on it since the sails go up as soon as I'm away from the slip.
__________________
S/V Latis
Brookings, OR
Ranger 33
Reply With Quote
  #31   IP: 206.125.176.3
Old 10-19-2009, 12:20 PM
sastanley's Avatar
sastanley sastanley is offline
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
Lightbulb

I selected - "no idea..." - but I also just bought an hour meter to put on the engine..I wonder if I could plug it into a 12v source to run it up to 800-900 hours which is what I suspect the motor has on it so it is more accurate when I install it?

Really, I bought the meter so I can track my own usage more carefully since taking ownership & fuel consumption. My wife and I were trying to count the hours this year based on memory (I am very bad about filling out the log book), and the best I can come up with from an estimate of consuming 29-30 gallons of fuel is about 35-40 hours, assuming .75 gal/hour.

Next season, I hope to use the boat more, and have more accurate numbers!
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif
Reply With Quote
  #32   IP: 173.79.222.18
Old 10-19-2009, 12:43 PM
Jesse Delanoy Jesse Delanoy is offline
Afourian MVP
 
Join Date: Dec 2006
Posts: 236
Thanks: 0
Thanked 2 Times in 2 Posts
I never had an engine hours meter, but I installed one when I repowered with a MM rebuilt engine three seasons ago. I find it highly useful to monitor fuel consumption (like Shawn, I see about 0.75 gal. per hour, unless I'm running right up around 2000 rpm, then it's just under a gallon), and to keep me on track for regular oil changes. I log the hours in a notebook at every gas fill-up and every oil change. In three seasons of use, I've logged about 300 hours, although last year got cut short due to some hull and keel damage, and we lost a lot of sailing time this year due to rainy weather. I just wish I'd installed the thing in a more convenient location - as it is on the front of the engine compartment, about a foot off the floor in the main cabin - and my eyesight isn't getting any better with age!
Reply With Quote
  #33   IP: 206.125.176.3
Old 10-19-2009, 03:11 PM
sastanley's Avatar
sastanley sastanley is offline
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
Jesse - good thinking..I was trying to decide where to mount it..at least I know where NOT to. (if I recall correctly, you have a C-30 also)

Anytime we drill holes in the boat it seems so permanent! I've already moved my Racor filter!

I was assuming for hookup, this is just another device that connects to the coil...assuming the coil is energized, the meter is running, and the engine is running.
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif
Reply With Quote
  #34   IP: 173.79.222.18
Old 10-19-2009, 04:19 PM
Jesse Delanoy Jesse Delanoy is offline
Afourian MVP
 
Join Date: Dec 2006
Posts: 236
Thanks: 0
Thanked 2 Times in 2 Posts
yup, 1977 Cat 30, no. 664.


yes, the meter has three wires:

hot - should be connected to constant 12 volt power - it's ok if this wire is cold when boat power is off - it just provides power when needed. I made sure to double check that the meter retains engine hours in memory, and does not go back to zero if all power is shut off, like radio station memories do (another story for a later time!).

sending - should be connected to a 12 volt power source hot only when the engine is running - this is the coil connection. I think it's hot even when the engine is off, if the ignition circuit is on - but since this is never the case on my boat except for very brief periods, it's not an issue.

ground - obvious.

Best place I can think of to mount it in our boats would be at the end of the galley counter, as high up as possible, opposite from the chart table, making sure to keep the wiring clear of the drawers in the galley console. If there's enough clearance between the back of the gauge and the sides of the drawers - not sure.
Reply With Quote
  #35   IP: 206.125.176.3
Old 10-20-2009, 10:58 AM
sastanley's Avatar
sastanley sastanley is offline
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
Jesse, thanks..I currently have my little automotive tach there, and I ran the wires external to the cabinet, down behind the cushion, in case I wanted to move it.
I ordered an analog hour meter so I won't have the memory problem, and I would expect my coil/ignition circuit to work the same way..powered only very briefly during start up procedures with the engine not running. Should be negligible.

I seem to recall there is probably enough room inside the cabinet for wires, but maybe not a 2" deep cutout for my analog meter. When I rebuilt my cabinet, I extended the counter top about 3" since you can't really effectively utilize that little area anyway...I have a little extra overhang for more instruments now
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif
Reply With Quote
  #36   IP: 99.6.130.173
Old 02-19-2010, 10:28 PM
mike boyd sr mike boyd sr is offline
Member
 
Join Date: Sep 2008
Location: antioch
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to mike boyd sr
atomic 4 hrs

hey don would this be hrs since original install or recient rebuild thanx
Reply With Quote
  #37   IP: 38.102.16.210
Old 06-08-2010, 06:44 AM
Administrator's Avatar
Administrator Administrator is offline
MMI Webmaster
 
Join Date: Oct 2004
Location: Chestertown, MD (Langford Creek)
Posts: 2,198
Thanks: 1,335
Thanked 365 Times in 182 Posts
Hi, Mike, and welcome to the forum.

I'm guessing that most folks would interpret the question as asking about the hours since the original install.

Bill
Reply With Quote
  #38   IP: 24.224.206.117
Old 08-05-2010, 10:00 PM
Mo's Avatar
Mo Mo is offline
Afourian MVP
 
Join Date: Jun 2007
Location: Halifax NS,
Posts: 4,470
Thanks: 292
Thanked 411 Times in 272 Posts
Smile

The engine in my C&C 30 has 1378 hrs on it. Runs like a dream although it sat unattended high and dry in the boat for a couple of years. Hauled it apart, cleaned it up... the major problem was the exhaust manifold froze and cracked.

I also have a full drop in "freshwater" great lakes engine that a friend sold me last year. He went for a diesel just because...well, he is a marine engineer so diesel is his thing. That one has less hrs on it and looks better cosmetically than mine. It and ran perfect the day I helped him pull it.

So, there's 2 with less than 2000 on them.
Reply With Quote
  #39   IP: 64.203.32.52
Old 08-06-2010, 10:53 AM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
Smile Dave's lil beastie

I don't have an hour meter so all I can do is guess. As some of you may no when I bought the Volador 26 years ago the engine was rusted/frozen tight. At that time it had set in the slip fro 5 years as the 3 guys I bought her from only used the boat as a plase to bring their girlfriends so their wives wouldn't find out. Well they found out just as I was walking by to hand a check to a guy further down the marina for a differant E-35 and I wound up making them an offer "as is" with an engine that wouldn't start or turn. It took me 5 days to get her running and I have used the boat a lot since. The original owner used the boat for 6 years cruising and racing and I have no idea how much he used it other than it sat due to his heart problems for a couple of years until those 3 bought her.
I'm guessing she has about 2000/2500 hours on it in forty years of ticking. That number may be a little high so I'm putting in 2000 hours which may be a bit high.
I will attest to the durability of the A-4. A friend of mine who worked on them as a marine mechanic said he saw many of them with over 4000 hours and still in good shape if they were properly maintained. He also said many were trashed due to neglect with only a few hundred hours on them.

I am planning on doing a compression check this weekend to satisfy my and others curiosity. I will use my screw in Snap-on guage.

Dave Neptune
Volador's A-4 about 2000 hours and a valve job 26 years ago.
Reply With Quote
  #40   IP: 148.170.241.1
Old 10-25-2010, 12:03 PM
ILikeRust's Avatar
ILikeRust ILikeRust is offline
Afourian MVP
 
Join Date: Sep 2010
Location: Henrico, VA
Posts: 2,202
Thanks: 2
Thanked 23 Times in 21 Posts
I had to select "no idea" but I do bet it's a bunch.

The boat is a 1968 model; the engine is 1983. The engine hours meter is non-functional and apparently has been for some time.
__________________
- Bill T.
- Richmond, VA

Relentless pursuer of lost causes
Reply With Quote
  #41   IP: 71.112.20.90
Old 03-20-2011, 11:14 PM
charles@pricefarrington.c's Avatar
charles@pricefarrington.c charles@pricefarrington.c is offline
Senior Member
 
Join Date: Aug 2008
Location: Sammamish, Washington
Posts: 199
Thanks: 0
Thanked 0 Times in 0 Posts
I have 395 on a local rebuild. When purchased in 08 she had less than 40 on rebuild, not even broken in yet...We don't let the wind gods dictate when we go....
__________________
74' Ranger 29
Reply With Quote
  #42   IP: 24.224.206.117
Old 08-21-2011, 10:25 AM
Mo's Avatar
Mo Mo is offline
Afourian MVP
 
Join Date: Jun 2007
Location: Halifax NS,
Posts: 4,470
Thanks: 292
Thanked 411 Times in 272 Posts
Smile More hrs than usual this year....

Installed a new hour meter this spring. Old one had 1378 prior to changing it; 47 hours currently on the new meter this year. Chartplotter records my mileage and it is 709 nm currently for this year. That is more engine time than I normally rack up. A few times I had to motor home in driving hail, no wind on one cruise...small things like that add to the hours. To give you an idea, due to weather, I am about 600 nm short of last years mileage for this time. The hours on the engine are about the same.

Currently coming up for her 3rd oil change this year. I change it at the beginning of season, about mid June, then around mid August. Boat laid up due to steering failure a few days ago, so while I wait for parts, some preventive maintenance.
__________________
Mo

"Odyssey"
1976 C&C 30 MKI

The pessimist complains about the wind.
The optimist expects it to change.
The realist adjusts the sails.
...Sir William Arthur Ward.

Last edited by Mo; 08-22-2011 at 08:30 AM.
Reply With Quote
  #43   IP: 173.69.152.238
Old 08-21-2011, 12:18 PM
joe_db's Avatar
joe_db joe_db is offline
Afourian MVP
 
Join Date: May 2009
Posts: 4,474
Thanks: 49
Thanked 1,026 Times in 721 Posts
Update:
My "new engine", installed in May, was assumed to be relatively low time when installed based on condition when torn down.

I now have 38 hours since installing it and so far the oil is clear and NONE has leaked out or burned
This is confusing me - the old engine did both with enthusiasm
Reply With Quote
  #44   IP: 64.229.64.162
Old 09-08-2011, 11:42 AM
Bingy Bingy is offline
Senior Member
 
Join Date: Sep 2011
Location: Harrow Ontario
Posts: 129
Thanks: 1
Thanked 1 Time in 1 Post
Ranger 30

I currently own a Ranger 30 and have had very little problems with my A4.
I have a maintenance question. The rervoir for the transmission has a shallow well for lubricant. Is there a proper level to look for or do we assume as long as engine oil level is good then all is good.
New member but have owned two boats with A4. Previous was C&C 35 Mk 1
Reply With Quote
  #45   IP: 148.170.241.1
Old 09-08-2011, 05:05 PM
ILikeRust's Avatar
ILikeRust ILikeRust is offline
Afourian MVP
 
Join Date: Sep 2010
Location: Henrico, VA
Posts: 2,202
Thanks: 2
Thanked 23 Times in 21 Posts
Quote:
Originally Posted by Bingy View Post
The rervoir for the transmission has a shallow well for lubricant. Is there a proper level to look for or do we assume as long as engine oil level is good then all is good.
Yes. The reversing gear and crankcase share a common oil pan. There is no separate reservoir for the reversing gear.
__________________
- Bill T.
- Richmond, VA

Relentless pursuer of lost causes
Reply With Quote
  #46   IP: 64.231.114.164
Old 09-09-2011, 09:39 AM
Bingy Bingy is offline
Senior Member
 
Join Date: Sep 2011
Location: Harrow Ontario
Posts: 129
Thanks: 1
Thanked 1 Time in 1 Post
Thanks
I have to travel up and down the Detroit River which sometimes require 3 to 4 hours running at continuous speed between 5.5 and 6 knots due to adverse currents and wind.
The motor seems to be working a little harder after 3 or so hours.
I am worried about possible thrust bearing or other bearing becoming hot .
Motor has fresh oil,cooling system flushed ,stuffing box very slow drip.
Any comments appreciated
Reply With Quote
  #47   IP: 206.125.176.3
Old 09-09-2011, 01:12 PM
sastanley's Avatar
sastanley sastanley is offline
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
bingy, you may want to start a new thread in the appropriate section of the forum..it will likely get more attention.
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif
Reply With Quote
  #48   IP: 141.0.9.76
Old 11-05-2011, 10:41 AM
mpohrille mpohrille is offline
Senior Member
 
Join Date: Feb 2007
Posts: 29
Thanks: 0
Thanked 2 Times in 2 Posts
Talking

I have a 1976 FWC A4 with reduction drive. 2100 hours, compression 110 all cylinders and oil lab results show no problems. I change oil @ 25 hours . Amazing engine
Reply With Quote
  #49   IP: 184.0.176.66
Old 04-19-2012, 07:50 AM
hanleyclifford's Avatar
hanleyclifford hanleyclifford is offline
Afourian MVP
 
Join Date: Mar 2010
Posts: 6,978
Thanks: 172
Thanked 280 Times in 226 Posts
Smile

Quote:
Originally Posted by mpohrille View Post
I have a 1976 FWC A4 with reduction drive. 2100 hours, compression 110 all cylinders and oil lab results show no problems. I change oil @ 25 hours . Amazing engine
May we see some pictures?
Reply With Quote
  #50   IP: 68.56.139.11
Old 06-09-2012, 01:39 AM
romantic comedy's Avatar
romantic comedy romantic comedy is offline
Afourian MVP
 
Join Date: May 2007
Location: florida
Posts: 1,912
Thanks: 13
Thanked 118 Times in 100 Posts
Interesting thread. I have a few thoughts and questions.

In the 80s, I was at a Honda power equipment presentation. They told us that the usual rebuild time was 2000 hours. I think that I have also heard that figure elsewhere.

Doing some fuzzy math: Consider a car: 50 mph times 2000 hours equals 100,000 miles. How does that sound?

I also wonder about hour meters. I had a 1965 Chris Craft cabin cruiser with a 283 Chevy inboard. It had a mechanical tachometer and hour meter. The manual said that one hour equaled a certain number or revolutions, and it was not based on time. I think it was 3000 RPM, but I am not sure. So one hour at 3000 RPM was one hour on the meter.

As I understand it, engine hour meters are just clocks. I have an old stewart warner engine hour gauge that I took apart. It has a clock mechanism in it. Pretty cool.

I guess for our engines, run at the same RPM for long hours, an hour is an hour. The RPM, whether 1400 or 2400 probably is not significant.

So, how about that 4700 hour engine? Say the boat runs at 6 knots.
6 nautical miles/hour times 4700 hours equals: 28,000 nautical miles
Now that is more then the circumference of the earth!!

2000 hours at 6 knots equals: 12000 nautical miles. How does that compare with 100,000 automotive miles?

I ran down the ICW from Annapolis to Florida, about 1000 nautical miles.

1000 nautical miles equals 6 knots times 167 hours. Does that mean that I ran the engine for 167 hours? If I ran for 8 hours a day, which sounds right, it comes out to 21 days. That is what my log book says too.

Then the question is how many miles would 167 hours be on a car. Since the engine is running at almost full power, compare to a car going at 100 MPH.
167 hours times 100 mph equals: 16,100 miles. That sounds right to me.

Getting back to the 4700 hour engine. How many car miles would that be?
4700 hours times 100 miles per hour equals : 470,000 miles.
Earth circumference is 24,901 miles, according to wiki.
That means that at 4700 hours, a car would have gone, at 100 MPH, 18.9 times around the earth.

So it is 130 am and I am sitting here in front of my computer, at home, and not snuggling my wife, in the Vee berth, swinging on the hook....

Then again; if a sailboat leave the dock heading north at 4.5 knots, with a 12 knot sw wind........
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fuel-Related Engine Shutdowns Don Moyer Fuel System 32 02-18-2011 04:36 PM
Removing the engine from your boat Don Moyer General Interest 13 06-27-2008 11:06 AM
Overheating problems jdaly986 Cooling System 1 01-16-2008 10:32 AM
Engine dies after it warms toscaindub Troubleshooting 2 08-13-2005 03:39 PM
Engine woes Jacob Wenegrat Troubleshooting 5 07-14-2005 09:33 PM


All times are GMT -4. The time now is 08:01 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved