Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Reversing Gear

Reply
 
Thread Tools Display Modes
  #1   IP: 172.58.43.0
Old 10-15-2019, 11:13 AM
ajgaines ajgaines is offline
Senior Member
 
Join Date: Aug 2019
Location: Alameda
Posts: 58
Thanks: 10
Thanked 0 Times in 0 Posts
Gear shifter key

I put in a rebuilt engine on the mounts of the old engine. In trying to install the gear shifter I found that the key for the rebuilt engine is on the opposite side of the last engine. How do I move this key from one side to another? I tried to pry it for a moment but was worried I'd warp it if I tried any harder, is it something that even comes out?
Attached Images
  
Reply With Quote
  #2   IP: 32.211.28.40
Old 10-15-2019, 11:43 AM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
That's called a woodruff key and it will come out - if it has to. Might be a fight.
Why not just buy a new one and install it in the other groove?
Reply With Quote
The Following User Says Thank You to Al Schober For This Useful Post:
ajgaines (10-15-2019)
  #3   IP: 108.34.253.10
Old 10-15-2019, 11:52 AM
jcwright jcwright is offline
Afourian MVP
 
Join Date: Jul 2012
Posts: 158
Thanks: 5
Thanked 99 Times in 75 Posts
Hello ajgaines.

Yes, it should be possible to remove the key. If your key resembles mine, it is beveled on the side that is set into the shaft. Vice grips and penetrating oil may help. If the key is damaged, it can be replaced with a new one.

Jack.

(I see my note crossed with Al's.)

Last edited by jcwright; 10-15-2019 at 11:53 AM. Reason: redundant answer
Reply With Quote
The Following User Says Thank You to jcwright For This Useful Post:
ajgaines (10-15-2019)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
idler gear conundrum azazzera Overhaul 2 07-02-2015 08:33 PM
Forward and Reverse Gear Adjustment Issues CraigRun Reversing Gear 12 05-17-2012 09:15 PM
Reverse gear overheat?? NorfolkRagbagger Reversing Gear 5 10-13-2010 09:20 AM
Replacing gaskets on reversing gear and reduction gear housings phorvati Troubleshooting 1 10-06-2008 02:10 PM


All times are GMT -4. The time now is 04:38 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved