#1
IP: 97.113.104.138
|
|||
|
|||
Water Jacket Side Plate alignment problem
I've read the stories of the nightmarish broken bolt syndrome: All 8 bolts came out just fine when I decided to finally do the replacement side plate. Yes! However, the new plate won't go on because the 8 bolts cannot all be placed, one or another is going crocked and something is "out of spec". The block side looks good and the 8 bolts fit in the threaded holes nicely (without the plate). The plate is the new replacement from Moyer. Yiks. What does this mean and how is it fixed? Letting one or two of the bolts go in slightly angled would mean cross-threading and would surely leak, isn't that right? So I need a solution, please.
|
#2
IP: 192.55.54.44
|
||||
|
||||
I would call the Mighty Ken at the Moyer order/support line and ask some questions. Whatever the problem is, I'm sure MMI has seen it before.
__________________
Thanks, Ron Portland, OR |
The Following User Says Thank You to ronstory For This Useful Post: | ||
DDO (04-12-2020) |
#3
IP: 47.142.136.146
|
|||
|
|||
The threads on the engine are shot as result the bolts are not lining up properly. The bolts came out easy - that's a clue.
You will have to go to studs. MMI makes a stud "kit" just for this purpose. As suggested call MMI - Ken will fix you right up. ex TRUE GRIT Last edited by JOHN COOKSON; 04-12-2020 at 11:29 PM. |
The Following User Says Thank You to JOHN COOKSON For This Useful Post: | ||
DDO (04-12-2020) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Water leaking from exhaust side of junction | 69Cal34 | Troubleshooting | 4 | 07-25-2017 01:57 PM |
wit's end | damienk | Troubleshooting | 64 | 07-28-2015 02:50 PM |
water jacket stud vanished | JimF | General Interest | 5 | 10-07-2014 08:46 PM |
water jacket side plate off: suggestions for cleaning in & painting out? | Marty Levenson | Cooling System | 4 | 09-22-2011 11:20 AM |
Antifreeze leak from water jacket side plate | Mr. Close Reach | Cooling System | 13 | 05-16-2011 12:36 PM |