Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Ignition System

Reply
 
Thread Tools Display Modes
  #1   IP: 24.163.57.118
Old 01-08-2014, 03:37 PM
Michael Edwards Michael Edwards is offline
Senior Member
 
Join Date: May 2010
Posts: 36
Thanks: 0
Thanked 3 Times in 3 Posts
Sonic spark plugs

Alright folks, this is an interesting modification to spark plugs.
http://www.enginebrain.com/
They use OEM spec plugs and drill a small hole in the ground strap to create an ultra-sonic wave in the air/fuel mix.
The discussion on the web-site is interesting reading.
On our A4, I have made changes that have made the engine purr, especially the temperature control valve and heat exchanger that keeps it steady at 180*. And the prop (10x7) that gives us a comfortable 1800 RPM and 5.5kts cruise speed (GPS).
I'm curious to hear feedback on the science of these spark plugs.
Reply With Quote
  #2   IP: 216.115.121.240
Old 01-08-2014, 05:09 PM
lat 64's Avatar
lat 64 lat 64 is offline
Afourian MVP
 
Join Date: Oct 2008
Location: Fairbanks, Alaska
Posts: 1,964
Thanks: 39
Thanked 240 Times in 157 Posts
Both web sites show some random and nonlinear writing.
Not much makes sense to me, Just a lot of what may be cleaver thinking but not presented as understandable.
__________________
Whiskeyjack a '68 Columbia 36 rebuilt A-4 with 2:1

"Since when is napping doing nothing?"
Reply With Quote
  #3   IP: 108.90.160.12
Old 01-08-2014, 05:23 PM
The Garbone The Garbone is offline
Senior Member
 
Join Date: Dec 2013
Location: Daytona Beach, FL
Posts: 299
Thanks: 15
Thanked 14 Times in 13 Posts
I think your time would be better spent building a tuned intake and airbox... Maybe look into a keihin fuel injection system, mapping would be easy since you would always be at sea level. Plugs, not so much..
__________________
Gary
78' Catalina 30 #1179
www.svknotaclew.wordpress.com
Reply With Quote
  #4   IP: 174.94.33.109
Old 01-08-2014, 06:12 PM
67c&ccorv's Avatar
67c&ccorv 67c&ccorv is offline
Afourian MVP
 
Join Date: Dec 2008
Location: London, ON
Posts: 1,559
Thanks: 4
Thanked 9 Times in 9 Posts
He was able to get a patent on the invention - interesting...not very expensive either.

Reply With Quote
  #5   IP: 71.118.13.238
Old 01-09-2014, 12:25 PM
Dave Neptune Dave Neptune is online now
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
Thumbs down Ionizing

There was a big deal raised in the mid 70's with the same ideology. It was a series of induction coils "wired in series" and connected to the plugs and the plug wire plugged into the coil(s). There were all kinds of claims as to better millage and increased performance and of course it was recommended that you replace the plugs and do an "archaic" tune up IE replacing the points and setting the timing~sound familiar? The increase in millage and performance was due to the tune up mostly.
A reputable shop I won't mention that I was associated with had an employee (hi end engine builder) tell the guys that it really did make a difference. His BIL installed a set in an old something and he found that his partially fouled plugs did run cleaner. Well that shop set up a dyno and began testing some older engines and it did seem to help a bit. They did not find any gains but did find that the plugs seemed cleaner. So they set up a BB Chevy 7K RPM engine with a Mallory "rev-pole" style dual point distributor~top of the line at the time and started testing. They could find no gains but indeed the plugs did stay cleaner again. So they decided to make there own "ionizing system " only making there own more powerful coils and as testing continued again no gains but the very slightly cleaner plug. After 4 or 5 sets of ionizing coils and still being intrigued a much hotter coil was tried. At around 6,000 RPM's under a big load of probably 700 HP the engine burped and big parts of the crank and a few rods and pistons exited the engine through the pan and crank galley in a hurry. A total loss!!
What happened was that enough induction built up so the "ionizing" coils actually created a series of sparks that were not part of the "timing" and sparks flew with the pistons in various positions, that was the shudder during the "burp" and the end of a very nice engine.
Those devices were around for about 3 maybe 4 years.
These plugs may indeed ionioze slightly or it is just the hole starting a "larger" and somewhat warmer area around the tip of the plug and this would only be effective at idle and very low RPM's, kinda like an increase in "gap".

Dave Neptune
Reply With Quote
  #6   IP: 199.173.225.33
Old 01-09-2014, 01:05 PM
joe_db's Avatar
joe_db joe_db is online now
Afourian MVP
 
Join Date: May 2009
Posts: 4,474
Thanks: 49
Thanked 1,026 Times in 721 Posts
Just get an MSD ignition box. You'll get several sparks at 3,000 RPM and below instead of one and "ionize" the crap out of your engine with no timing issues. One of my spring projects.
Reply With Quote
  #7   IP: 174.58.84.3
Old 01-09-2014, 08:02 PM
romantic comedy's Avatar
romantic comedy romantic comedy is offline
Afourian MVP
 
Join Date: May 2007
Location: florida
Posts: 1,912
Thanks: 13
Thanked 118 Times in 100 Posts
What happened with MSD anyway? There was a time that was high tech.
Reply With Quote
  #8   IP: 72.45.14.161
Old 01-09-2014, 08:23 PM
joe_db's Avatar
joe_db joe_db is online now
Afourian MVP
 
Join Date: May 2009
Posts: 4,474
Thanks: 49
Thanked 1,026 Times in 721 Posts
They are still very much in business.
Reply With Quote
  #9   IP: 206.125.176.5
Old 01-10-2014, 09:53 AM
sastanley's Avatar
sastanley sastanley is online now
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
When I was re-building engines and tinkering/tuning my early 90's Civic, MSD was all over the place..they were a popular replacement for the standard Honda resistor box style multi-point fuel injection/ignition system, which was just fine at 100-110HP stock Honda motors, but wasn't up to the task during what I call the ricer revolution, when they were modifying the crap out of the motors and slapping on turbos and stuff.
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif

Last edited by sastanley; 01-10-2014 at 09:58 AM.
Reply With Quote
  #10   IP: 107.0.6.242
Old 01-10-2014, 10:50 AM
hanleyclifford's Avatar
hanleyclifford hanleyclifford is offline
Afourian MVP
 
Join Date: Mar 2010
Posts: 6,978
Thanks: 172
Thanked 280 Times in 226 Posts
Question Trying to Wrap Brain Around This

So let me get this straight: should I drill a small hole in the spark plug ground strap and get better engine performannce?
Reply With Quote
  #11   IP: 199.173.226.236
Old 01-10-2014, 10:52 AM
joe_db's Avatar
joe_db joe_db is online now
Afourian MVP
 
Join Date: May 2009
Posts: 4,474
Thanks: 49
Thanked 1,026 Times in 721 Posts
http://www.msdignition.com/Products/...Rev_Limit.aspx

http://www.msdignition.com/Products/..._Ignition.aspx

If you read their tech notes, they can be triggered by a Pertonix Ignitor or the stock points. One thing that would be a hassle is unwiring it to check the timing unless you can find a timing light that can deal with multiple sparks. Any speed below 3,000 RPM and it will fire each plug several times. You do get around the coil heat issue because these units don't store energy in the coils.
Reply With Quote
  #12   IP: 216.115.121.240
Old 01-10-2014, 12:28 PM
lat 64's Avatar
lat 64 lat 64 is offline
Afourian MVP
 
Join Date: Oct 2008
Location: Fairbanks, Alaska
Posts: 1,964
Thanks: 39
Thanked 240 Times in 157 Posts
Quote:
Originally Posted by sastanley View Post
When I was re-building engines and tinkering/tuning my early 90's Civic, MSD was all over the place..they were a popular replacement for the standard Honda resistor box style multi-point fuel injection/ignition system, which was just fine at 100-110HP stock Honda motors, but wasn't up to the task during what I call the ricer revolution, when they were modifying the crap out of the motors and slapping on turbos and stuff.
I found the cheapest way to get more pep out of a Honda Civic was to drain the oil. Discovered this when the engine was low on oil. It seemed to be a zooming' machine. Topped up the oil and it was just a regular Honda again.

Fun Quiz:
Can you figure out why?
__________________
Whiskeyjack a '68 Columbia 36 rebuilt A-4 with 2:1

"Since when is napping doing nothing?"
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
White smokes+gasoline+black spark plugs Tiree Troubleshooting 25 08-23-2010 12:33 PM
Rusty Spark Plugs rpowers General Maintenance 1 07-30-2010 06:17 PM
Ericson 29: Sooty spark plugs learking Troubleshooting 2 03-28-2008 05:23 PM
rusting spark plugs baysailor General Maintenance 1 09-08-2007 09:14 AM
Which Spark Plugs? randall Electrical 1 07-10-2006 08:21 AM


All times are GMT -4. The time now is 04:44 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved