Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Electrical

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   IP: 73.234.59.26
Old 07-31-2020, 06:07 AM
southcoasting's Avatar
southcoasting southcoasting is offline
Senior Member
 
Join Date: Nov 2011
Location: Fairhaven, MA
Posts: 141
Thanks: 15
Thanked 22 Times in 13 Posts
Help: How to wire the old gauges?

So I finally got my engine started yesterday for the first time after my major rebuild! Felt pretty good. I went through the troubleshooting standards on here and from Don’s bulletins after no start. Got my timing on point as well from the schematics on here which was great. Printed those out to leave in my binder...I am thankful for this community!

However, I did not let her run for long because I could not get my gauges to work. I wired them the same as how they came with the boat so now I am thinking they were wired wrong already. So I need help figuring this out.

These old gauges don’t have any labels/letters in back of them to indicate what is what. So I figured some of the more experienced heads on here know exactly what is what...I assume these old gauges had a standard for the left post and right post hence the lack of labeling...I posted a pic of the before and after...again, just trying to get an idea of what goes to left and what goes to right posts...Not the best pics but figured they would help to see what I am looking at...

Center is ammeter, left is temp gauge, right is oil pressure. On the left temp gauge, that one has 4 posts...I assume one is for lighting and the other gauges have no lights hence only two posts...I assume the extra 4th post on this temp gauge that appears to be connecting to light so that you can jump it to other gauges with lights?

BTW: I do plan on replacing these as well as all wiring in the near future...but for now, I just wanna get out there after a 5 year restoration of my boat!

I always run a search before posting but I could not find any about this one...
Attached Images
  
__________________
1971 Tartan 34C Sloop "NOVA LUNA", Rebuilt (2019) Fresh Water Cooled A4 (Bought boat in 2014)
1968 Tartan 27 Yawl "Destinada", rebuilt Old Lyme freshwater A4 (Sold boat in 2014)

Last edited by southcoasting; 07-31-2020 at 06:19 AM. Reason: Adding more info
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Single wire alternator and the R solenoid terminal ndutton Electrical 14 02-09-2017 10:41 AM
Electrical Connectors, Wire Length, and Voltage Drop RUSSELL Electrical 6 05-12-2015 01:45 PM
Fuse location in IGN to Coil + wire kwalters Ignition System 13 09-14-2009 05:01 AM
grounding gauges stevep Electrical 3 08-10-2008 10:11 AM


All times are GMT -4. The time now is 10:43 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved