Another new guy (lurker) for a couple of years. My A-4 has been running well after a 2 year layup and new water separator filter. Now it is dumping clean oil into the bilge.
The flow, not a leak, is above the carburetor and pumps well during engine run. I added oil and got to the dock last night but now I have to mitigate oil in the bilge, and stop the leak.
I will have pictures this afternoon. It is not the flange attachment to the sending/pressure unit as that broke off several years ago.
1968 fresh water cooled with 440 hours on a PO rebuild.
Any troubleshooting help is greatly appreciated
The flow, not a leak, is above the carburetor and pumps well during engine run. I added oil and got to the dock last night but now I have to mitigate oil in the bilge, and stop the leak.
I will have pictures this afternoon. It is not the flange attachment to the sending/pressure unit as that broke off several years ago.
1968 fresh water cooled with 440 hours on a PO rebuild.
Any troubleshooting help is greatly appreciated
Comment