Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Drive Train / Propellers

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   IP: 204.77.163.55
Old 04-30-2018, 02:22 PM
pcupach pcupach is offline
Frequent Contributor
 
Join Date: Jan 2018
Posts: 5
Thanks: 0
Thanked 4 Times in 2 Posts
Max Prop 3 Blade 12" prop

I installed a Max Prop 3 Blade 12inch prop this winter.
I have a Ranger 33 with an Atomic 4 1:1 direct drive transmission.
I removed a folding 2-blade Martec prop.
-I was experiencing a gross amount of prop walk with the Martec 2 blad folding prop.
--The expectation is: The 3 blade Max Prop will reduce the prop walk I have been experiencing with the Martec 2 blade folding prop.

The removal of the Martec prop was simple, I soaked it down with PB Blaster a few days prior to trying to remove it.
The Maxprop install was straight forward. The guys at PYI Maxprop provided the pitch ratio for the A4 and the settings I needed.
Be sure to order the grease gun and grease from them when you order the prop...that will save you time delay.
Ill post the pitch setting and performance info later this summer.
Im still waiting to get back in the water...
Reply With Quote
The Following 2 Users Say Thank You to pcupach For This Useful Post:
adab1402 (10-19-2020), GregH (04-30-2018)
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Do you have a two or three blade prop, and does it fold, feather? Delphis Polls 50 08-28-2021 01:36 PM
Want to trade? Martec folding prop for indigo 3 blade? yeahjohn Drive Train / Propellers 7 01-21-2018 10:08 PM
Need 2 blade RH atomic 4 Prop for V-Drive 1" cal34rcs Wanted to Buy - Other items 2 04-21-2016 01:57 PM
It started as a simple Cutless bearing replacement... cdhickey Drive Train / Propellers 8 05-02-2015 12:48 PM
3 Blade Prop for Cruising Kurt Drive Train / Propellers 5 04-05-2009 11:32 PM


All times are GMT -4. The time now is 03:59 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved