#1
IP: 71.71.116.117
|
|||
|
|||
Bilge fiberglass has holes?
So I noticed this a couple of weeks ago when vacuuming the water out of the bilge. You can see small holes in between the weave of the fiberglass. Does this need to be addressed? What could of caused this?
__________________
Chris 1973 Pearson 30 #411 Trinity, North Carolina |
#2
IP: 32.211.28.40
|
||||
|
||||
Looks like a classic case of a slightly dry layup. Ignore it.
|
The Following 2 Users Say Thank You to Al Schober For This Useful Post: | ||
Dave Neptune (08-20-2017), sastanley (08-22-2017) |
#3
IP: 146.23.30.233
|
||||
|
||||
Looks like you could eat out of that bilge.
__________________
Marker Dave "Solitaire" '75 Catalina 30 #65 |
#4
IP: 174.193.155.82
|
|||
|
|||
May look like that but I sure wouldn't, I haven't even cleaned it. Just vacuumed the water out with my ShopVac.
Another bilge question...the fiberglass engine pan seems to have a solid front so any water coming in from the aft of the boat runs under the pan. Was this how Pearson designed this?
__________________
Chris 1973 Pearson 30 #411 Trinity, North Carolina Last edited by rockhopper; 08-22-2017 at 08:12 PM. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Replacing fuel level sending unit in Monel Fuel tank with non standard flange holes | Bryanbt | Boat Construction/Repair | 9 | 07-11-2013 07:42 AM |
Oil in Bilge | butcher43@att.net | Troubleshooting | 5 | 05-21-2012 08:06 PM |
Bilge alarms | ILikeRust | General Interest | 8 | 10-21-2011 06:29 AM |
Head Holes | Jim Mac | Overhaul | 2 | 02-27-2007 06:54 PM |
Head Holes | Jim Mac | Overhaul | 1 | 02-24-2007 07:38 PM |