#1
IP: 104.249.229.37
|
|||
|
|||
OPSS Switch question
Greetings - a couple questions as I upgrade to a electric fuel pump (working with the MM conversion kit)
1) the brass plug I need to remove to install the OPSS is giving me grief. Instead of fighting this any longer, I got a bright idea.....wondering if I can add the OPSS to the same outlet as the Oil Pressure sending unit. To avoid any extreme torque on that location, I would use a “AN” fitting, and remotely mound the sending unit and OPSS. Any reason this won’t work? 2) I am adding a fuel shutoff solenoid. Any reason I can’t power this off the coil “+” terminal ? Turn off the engine, solenoid closes. This is over and above the valve on top of the tank. As always, I value, and appreciate the input of this group. Cheers Jimmy
__________________
Jimmy C&C 29 MK1 Erieau , Lake Erie |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How much voltage drop at Starter while cranking? | JackConnick | Ignition System | 67 | 07-13-2014 01:03 PM |
Another stupid electrical question: Batt switch to off :o | toddster | Electrical | 11 | 11-27-2013 09:38 AM |
Master Switch question | Robert Suda | Introductions | 1 | 07-07-2013 01:38 PM |
Battery Switch Question | Loki9 | Electrical | 3 | 04-21-2012 04:55 PM |
Wiring spaghetti | ndutton | Electrical | 35 | 09-07-2011 06:18 AM |