|
#1
IP: 24.190.86.12
03-31-2005, 05:57 PM
|
|||
|
|||
Condenser machine screw
Oops! I dropped the machine screw which holds my condenser in place and it is unretrievable in the bilge. I have the Delco type distributer. Does anyone know the dimensions of the screw or at least a likely place to begin a bracketing process. Thank you.
|
|
#2
IP: 216.42.116.241
04-01-2005, 01:20 PM
|
|||
|
|||
|
Is it possible to reach the dropped screw by, say, taping a small but strong magnet to the end of a wire coat hanger and fishing around for the screw?
|
|
#3
IP: 24.190.86.12
04-02-2005, 11:59 AM
|
|||
|
|||
|
I am going to visit a auto body shop today to see if there is a magnetic tool to retrieve such bolts but I'm still hoping someone knows the size and thread details. Thanks
|
|
#4
IP: 24.190.86.12
04-02-2005, 03:46 PM
|
|||
|
|||
Problem solved
A trip to the auto parts store and a container of mixed ignition machine screws later and the ignition replacement is complete. The motor is started and my boating season is underway. Most importantly I can move the boat from the work dock and the potential charges which can occur.
|
 |
|
|
Linear Mode
