#1
IP: 68.127.11.158
|
|||
|
|||
Machine shop in San Francisco Bay Area?
Hi all,
Does anyone have a recommendation for machine work on an A4 block in the San Francisco Bay Area? I would like to take my block to someone who has experience with A4's if possible. Thanks for any info. |
#2
IP: 75.192.159.252
|
||||
|
||||
I found this tidbit in a 2007 post from Don:
Quote:
Bill |
#3
IP: 68.127.11.158
|
|||
|
|||
Thanks for the info. I'll give them a call.
|
#4
IP: 99.129.48.41
|
|||
|
|||
also try Loyd engineering in Oakley . Mike is very good and fair
|
#5
IP: 68.127.11.158
|
|||
|
|||
Great! I contacted List Marine and they don't do machine work - at least they don't rebore blocks. They recommended another machine shop but I've used that shop before and they were pretty inept.
I'll check out Lloyd Engineering - Thanks! |
#6
IP: 98.248.12.160
|
|||
|
|||
A4 machine shop in SF
Just for information, Tom List retired several months ago and is off sailing somewhere in the Pacific. The business is now operated by long time employees and still enjoys a fine reputation.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Head/Manifold Shop in Annapolis Area | HarryB | Good Guys | 0 | 07-17-2011 12:22 PM |
steps prior/post machine shop | ArtJ | Overhaul | 9 | 02-01-2011 11:38 AM |
Good guy in San Francisco Area? | E27Sailor | Good Guys | 1 | 12-16-2010 11:29 AM |
Spring Garden machine shop | jhwelch | General Interest | 0 | 06-13-2008 06:55 AM |
machine shop | Tom Alessi | Good Guys | 1 | 01-28-2008 10:04 AM |