Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Troubleshooting

Reply
 
Thread Tools Display Modes
  #1   IP: 67.224.139.168
Old 10-06-2008, 08:10 AM
phorvati phorvati is offline
Senior Member
 
Join Date: Jan 2006
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
Replacing gaskets on reversing gear and reduction gear housings

Hi, I have the engine off the old mounts and on the cabin floor while I install new isolation mounts. Meanwhile I wanted to patch up some oil leaks. I know i have one off the front of the reduction gear flange, between the flange and reversing gear housing.
Should there be multiple(3) gaskets between the reduction gear and reversing gear housing, or is one enough. Also I am not seeing oil drips from the back of the reduction gear so is it safe to assume that I don't need to replace rear main oil seal?
Another question, now that the engine is on the cabin floor does it make sense to add oil and try to tilt the engine in hopes of catching the leak again?
Thanks, Petar
Reply With Quote
  #2   IP: 71.168.112.137
Old 10-06-2008, 02:10 PM
David Masury's Avatar
David Masury David Masury is offline
Senior Member
 
Join Date: Oct 2004
Posts: 265
Thanks: 0
Thanked 1 Time in 1 Post
this may no thelp you immediately, but I owuld recommend getting Don Moyer's manual on the A4... it covers a rebuild, but more importantly, it lists gaskets and parts etc. thus as you go through the engine now or later you will have the information you need.

David
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Paragon Reversing Gear ratio John R Reversing Gear 4 03-01-2007 10:11 AM
A4 with a 2:1 reduction gear Grampian30 Overhaul 1 03-15-2006 09:07 PM
A4 with 2:1 reduction gear Grampian30 For Sale - Engines and Engine Parts 1 02-19-2005 11:09 AM
A-4 with reduction gear PeterO For Sale - Engines and Engine Parts 0 10-21-2004 07:04 AM
A4 with reduction gear Grampian30 For Sale - Engines and Engine Parts 0 10-14-2004 11:59 AM


All times are GMT -4. The time now is 11:06 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2020 Moyer Marine Inc.

All Rights Reserved