Okay some more progress. The cap was 180 degrees out. Easy enough. One of the old down springs is broken. Anyone have a source to replace them?
Prop shaft attached and 95 percent aligned. Starter wired, Alternator mounted (still need to sort wiring), raw water hooked up and exhaust all booted up.
A bit more wiring, check rough timing fix the dizzy and I should be ready to fire it up. Fingers crossed.
Prop shaft attached and 95 percent aligned. Starter wired, Alternator mounted (still need to sort wiring), raw water hooked up and exhaust all booted up.
A bit more wiring, check rough timing fix the dizzy and I should be ready to fire it up. Fingers crossed.
Comment