#1
IP: 172.58.185.96
|
|||
|
|||
2 atomic 4s in Annapolis & rebuilt carb x2
I’ve got two engines. The one I got for parts and ran before I stripped off the distributor and manifold. The cracked manifold can probably be JB welded. The electronic distributor might be shot. I don’t know. I prefer the points.
The one that’s running has low compression in cylinder 3 & 4. The one carb is never used professionally rebuilt with all new parts including the float. The other carb I rebuilt myself and just needs to be dialed in. But is still good to go. The 3rd carb needs a rebuild. Tons of spares new and used. Points, plugs, wires, fuel filters, belts etc... Call me and let me know what you want. 443-797-3698 -Spencer |
#2
IP: 74.107.30.50
|
||||
|
||||
Spencer, Welcome to the forum. I am not too far away. I am always seriously looking for a block/motor to rebuild.
Some pictures would help. let's see what you got. Edit - You should have an email.
__________________
-Shawn "Holiday" - '89 Alura 35 #109 "Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!) Last edited by sastanley; 04-07-2019 at 08:55 PM. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rebuilt older Atomic Four | Rob Hutton | For Sale - Engines and Engine Parts | 3 | 11-09-2015 05:04 PM |
Rebuilt early model 61 Zenith carb | 67c&ccorv | Fuel System | 7 | 10-09-2013 07:49 PM |
Carb For Palmer P60 - Same as Atomic 4? | bpowdrell | Fuel System | 3 | 08-29-2012 08:58 AM |
Carburetor service kit or Rebuilt Carb (Late Model) | bgilbert | Fuel System | 8 | 06-29-2009 05:37 PM |
Rebuilt Carb | jdavid5158 | Troubleshooting | 1 | 03-15-2006 06:59 AM |