Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Overhaul

Reply
 
Thread Tools Display Modes
  #1   IP: 69.176.196.198
Old 05-13-2009, 09:06 AM
ghaegele's Avatar
ghaegele ghaegele is offline
Senior Member
 
Join Date: Jul 2006
Posts: 126
Thanks: 0
Thanked 4 Times in 2 Posts
Rebuild Accessory Drive

I recently posted a picture of an odd spring-like item in the pulley end of my accessory drive Aux Drive Question (Auxiliary drive, accessory drive... I have a different day job!) and was advised that it is a bad oil seal. My neighbor has a press. Can I pop the old seal out with that and replace it and the bearings? Anybody familiar with the procedure? How do I get the shaft out? Should I use a repair sleeve? Is that for damage to the shaft or the "seal counterface" on the drive housing? (The term came from the SpeedySleeve website).

Thanks
Reply With Quote
  #2   IP: 207.236.189.83
Old 05-13-2009, 04:34 PM
Flagman101's Avatar
Flagman101 Flagman101 is offline
Senior Member
 
Join Date: Jan 2009
Posts: 59
Thanks: 0
Thanked 0 Times in 0 Posts
They cant be poped out. You pretty much have to pull them out. The first one is easy but the last one will give you a good fight.
__________________
Daniel
1973 C&C30 MK1
Montreal, Canada.
http://bailandoavoiles.blogspot.com/
Reply With Quote
  #3   IP: 69.176.196.198
Old 05-18-2009, 11:24 AM
ghaegele's Avatar
ghaegele ghaegele is offline
Senior Member
 
Join Date: Jul 2006
Posts: 126
Thanks: 0
Thanked 4 Times in 2 Posts
This whole thing is taking too long so I've decided to just get the Moyer rebuilt and modified drive. (I took it apart and sat there looking at all the pieces and decided it was worth it to have somebody who does this for a living put it together for me!)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
To Rebuild or Not To Rebuild (That is the Question) jkenan General Interest 13 02-07-2011 03:29 PM
Flywheel and Accessory drive R & R Ken General Interest 3 11-24-2007 11:34 AM
Accessory drive flange Kelly Troubleshooting 1 07-09-2007 05:56 PM
Leaking Stud/Noise-Accessory Drive Simon Overhaul 4 05-25-2006 06:59 AM
Rebuild, Engine Rebuilder, Or PA ???? JasperWindvane Overhaul 1 01-22-2006 09:22 AM


All times are GMT -4. The time now is 01:32 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved