|
#26
IP: 23.16.249.113
04-18-2016, 11:55 PM
|
|||
|
|||
|
back in the water
After the splash today the vibration motoring home seemed greatly reduced! Maybe it was the zinc, or the mussels.....but on smooth water motoring at 2000 RPM I could barely feel any vibration on the tiller....and zero on the back stay. She really seemed to fly with the clean hull and prop. Think I'll just say good enough for now, go sailing, and see what transpires.
Many thanks for all the feedback.
__________________
Marty 1967 Tartan 27 Bowen Island, BC 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Forward and Reverse Gear Adjustment Issues | CraigRun | Reversing Gear | 12 | 05-17-2012 09:15 PM |
| Pressure on the drive lever to fully engage? | Andy Mck | Reversing Gear | 6 | 10-08-2009 10:33 AM |
| Reversing assembly on Elm Street | duncan59 | Reversing Gear | 3 | 07-07-2008 05:49 PM |
| Vibration in forward and reverse | MikeKnauf | Drive Train / Propellers | 6 | 02-10-2008 09:41 AM |
| Forward and reverse | Keymastr | Reversing Gear | 2 | 06-29-2007 10:44 AM |
Linear Mode
