Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > The Wish List

Reply
 
Thread Tools Display Modes
  #1   IP: 71.12.227.175
Old 07-03-2014, 10:35 PM
Trés 30's Avatar
Trés 30 Trés 30 is offline
Senior Member
 
Join Date: May 2014
Posts: 109
Thanks: 0
Thanked 7 Times in 7 Posts
Bolt Kits

I've been replacing old screws & bolts in the engine.
Fly wheel cover, alternator support arm, various mounting brackets.
Instead of trying to pick through the offerings at the local hardware it'd be nice to have a kit that has all new replacements in the proper grades (apparently stainless isn't the best for everything). Maybe two levels of kit, "Overhaul" & "Rebuild".

In the Overhaul kit please include bolts/screws (& appropriate washers) for:
-Fly wheel cover
-Fuel Pump mounting bracket
-Coil mount
-Throttle cable mount (& cable securing bolts)
-Distributor screw
-Alternator support arm (both ends)
-(& maybe starter mounting screws, as well as water jacket side plate, even though it's a kit of its own.)
Did I leave anything out?

Basically everything above the oil pan. The Rebuild kit can be the Overhaul kit plus everything else.

Thanks,
Leon

Last edited by Trés 30; 07-05-2014 at 10:06 AM.
Reply With Quote
  #2   IP: 107.0.6.242
Old 07-04-2014, 05:02 PM
hanleyclifford's Avatar
hanleyclifford hanleyclifford is offline
Afourian MVP
 
Join Date: Mar 2010
Posts: 6,978
Thanks: 172
Thanked 280 Times in 226 Posts
Oil pan cap screws get rusted and rounded and in some cases are hard to access with a socket. I converted to allen headed bolts where possible. Don't forget the copper washers.
Reply With Quote
Reply

Tags
bolt, kit, screw

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Port coil bracket mounting bolt threaded hole missing, well kinda' Elizabeth_B29 General Interest 13 03-28-2014 01:21 AM
Side Plate bracket bolt drip need temporary fix ArtJ Cooling System 9 07-17-2010 11:35 AM
loose bolt in oil pan rjm General Interest 4 12-08-2008 07:56 PM
5 bolt gasket on a 4 bolt carb? sastanley Fuel System 5 12-03-2008 01:22 PM
Broken off bolt - Patch over or remove? Terry Carson General Interest 2 09-02-2007 09:17 PM


All times are GMT -4. The time now is 10:28 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved