Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Electrical

Reply
 
Thread Tools Display Modes
  #1   IP: 142.68.108.11
Old 10-07-2008, 05:47 AM
rigspelt's Avatar
rigspelt rigspelt is offline
Afourian MVP
 
Join Date: May 2008
Posts: 1,187
Thanks: 0
Thanked 19 Times in 17 Posts
Securing batteries

You wouldn't think a person handy with tools would have to ask about this, but I haven't come up with a tidy solution. Our two batteries sit one above the other on shelves facing into the galley beside the port side of the engine front. Very easy to access for maintenance. They each sit in a plastic battery box, held down with a single web strap. The straps need replacing. The only ones I can find have those fiddly plastic loop mechanisms that never seem to draw down tight. Any suggestions? I don't want to build permanent boxes because then it will be hard to get at the batteries. A better tie down product would be ideal, I think.
Attached Images
 
__________________
1974 C&C 27
Reply With Quote
  #2   IP: 206.181.246.34
Old 10-07-2008, 08:38 AM
SEMIJim SEMIJim is offline
Senior Member
 
Join Date: Oct 2007
Posts: 129
Thanks: 0
Thanked 1 Time in 1 Post
I simply bought a new web strap with fiddly plastic buckle mechanism when one of ours broke.

I honestly don't understand those buckles. They're a hassle to get even moderately snugged-down and they're at least as big a hassle to get loose. rigspelt is right: There's got to be a better way.

Jim
Reply With Quote
  #3   IP: 207.34.223.165
Old 10-07-2008, 01:09 PM
Bob.Griffin Bob.Griffin is offline
Senior Member
 
Join Date: Jun 2007
Posts: 46
Thanks: 0
Thanked 4 Times in 4 Posts
Wouldn't it be great if you could buy a miniature version of the tie-down strap that truckers use to secure their load? They're the kind with a drum that you crank to wind in the strap, very reliable, strong and you can crank to exactly the right tension. Now maybe this is an opportunity for an entrepreneur to design and manufacture a range of different sized straps for all kinds of uses, I'd better rush out and apply for a patent!!
Bob (s/v Saga)
Reply With Quote
  #4   IP: 206.125.176.3
Old 10-07-2008, 01:35 PM
sastanley's Avatar
sastanley sastanley is online now
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
What about luggage straps?

I had never thought about it, but it just occurred to me that those goofy rainbow colored (and hopefully we could find them in black) straps that people have wrapped around their large checked baggage when hanging out in the baggage claim area.

I also have those funky plastic straps that I do not think would hold a 50+ lbs battery if it really wanted to take off across the boat.

rigspelt, don't you have a Catalina 30? My batteries are on the floor, farther outboard in the engine compartment, just forward of the sinks, but side by side.

-Shawn
Reply With Quote
  #5   IP: 138.88.162.86
Old 10-07-2008, 02:25 PM
msauntry's Avatar
msauntry msauntry is offline
 
Join Date: May 2008
Location: Annapolis, MD
Posts: 505
Thanks: 0
Thanked 4 Times in 4 Posts
I've used cargo tie downs to secure my gas tank and they haven't come loose in years. These are the spring loaded cam type, not the ratcheting type. I have seen the ratcheting type in stainless steel made in various sizes, but they weren't exactly cheap.
Reply With Quote
  #6   IP: 142.68.108.11
Old 10-07-2008, 04:40 PM
rigspelt's Avatar
rigspelt rigspelt is offline
Afourian MVP
 
Join Date: May 2008
Posts: 1,187
Thanks: 0
Thanked 19 Times in 17 Posts
Quote:
Originally Posted by sastanley View Post
rigspelt, don't you have a Catalina 30? My batteries are on the floor, farther outboard in the engine compartment, just forward of the sinks, but side by side.
We have a C&C 27.
__________________
1974 C&C 27
Reply With Quote
  #7   IP: 206.181.246.34
Old 10-08-2008, 08:24 AM
SEMIJim SEMIJim is offline
Senior Member
 
Join Date: Oct 2007
Posts: 129
Thanks: 0
Thanked 1 Time in 1 Post
The problem with any of these metal ratcheting load strap solutions is the mechanisms are made of plain old untreated steel. They'll corrode/rust in no time in a marine environment--esp. if you're in saltwater and esp. in the vicinity of battery fumes.

Jim
Reply With Quote
  #8   IP: 71.168.112.137
Old 10-08-2008, 11:34 AM
David Masury's Avatar
David Masury David Masury is offline
Senior Member
 
Join Date: Oct 2004
Posts: 265
Thanks: 0
Thanked 5 Times in 5 Posts
That looks like my C&C 27 MKlll.... the previous owner fabricated some aluminum straps that bolt inplace over the baterry boxes.. nothing fancy but they hold the batteries from sliding around.

David
Reply With Quote
  #9   IP: 138.88.162.86
Old 10-08-2008, 01:57 PM
msauntry's Avatar
msauntry msauntry is offline
 
Join Date: May 2008
Location: Annapolis, MD
Posts: 505
Thanks: 0
Thanked 4 Times in 4 Posts
A hardwood cross bar with threaded rod holding them to the base, like in some cars. Aluminum is a conductor so I'd steer clear of that.
Reply With Quote
  #10   IP: 142.68.108.11
Old 10-08-2008, 03:51 PM
rigspelt's Avatar
rigspelt rigspelt is offline
Afourian MVP
 
Join Date: May 2008
Posts: 1,187
Thanks: 0
Thanked 19 Times in 17 Posts
Quote:
Originally Posted by David Masury View Post
That looks like my C&C 27 MKlll.... the previous owner fabricated some aluminum straps that bolt inplace over the baterry boxes.. nothing fancy but they hold the batteries from sliding around.
Quote:
Originally Posted by msauntry View Post
A hardwood cross bar with threaded rod holding them to the base, like in some cars. Aluminum is a conductor so I'd steer clear of that.
This approach makes most sense. A pair of stainless saddles on the shelft on each side, a hooked stainless upright bolt that hooks into each saddle, a hardwood bar across the top of the battery box lid, and a wing nut on each bolt. Just have to find long SS bolts and get a hook welded on the bottom. Or drill a hole in the shelf for each bolt and thread the bolt straight up with a fender washer against the bolt head underneath the shelf. Thanks, guys.
__________________
1974 C&C 27
Reply With Quote
  #11   IP: 74.40.167.110
Old 10-10-2008, 09:44 AM
JimG JimG is offline
Senior Member
 
Join Date: Mar 2005
Location: Selma OR
Posts: 123
Thanks: 0
Thanked 3 Times in 3 Posts
Go to any rafting outfitter, and you'll find a great alloy cam buckle that works on 1" webbing. I use them for everything, from battery hold-down to lumber rack.
__________________
S/V Latis
Brookings, OR
Ranger 33
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Alternator/regulator/new AGM batteries stevep Electrical 6 09-30-2008 06:37 PM
Grounding both batteries off the same lead Baltimore Sailor Electrical 15 08-25-2008 04:54 AM
Temp gauge at max with batteries off! Baltimore Sailor General Maintenance 2 07-27-2008 08:10 PM
Charging batteries fvigeant Troubleshooting 2 05-27-2008 06:06 PM
Batteries not charging Eric Electrical 2 06-20-2005 06:09 AM


All times are GMT -4. The time now is 04:53 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved