|
|
|
#1
IP: 24.59.253.209
10-01-2018, 06:05 PM
|
|||
|
|||
|
Anyone tried the RS11 CANbus Engine Data Converter?
Hi all,
Sailing for 50+ years, but new to using inboards. And I'm not known for extensive knowledge of engine mechanics  . Last year got a 1978 Catalina 30 with A-4 -- well maintained, but not much upgraded. Need to upgrade knot and depth meters, and thinking of installing NMEA 2000 network. So then the question is: Can I also add engine monitors (just the basics -- temp and RPM) to the system? This RS11 CANbus Engine Data Converter is the first thing I've found that might do the trick. Anyone with experience?Thanks. 
|
|
#2
IP: 137.200.32.38
10-02-2018, 10:22 AM
|
||||
|
||||
|
I can't see any reason that wouldn't work, if you have the right instruments to display the data. Seems fairly expensive but a cool way to go.
Last edited by joe_db; 10-02-2018 at 10:28 AM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| no water flow, engine overheats | shawnb | Troubleshooting | 10 | 03-30-2017 01:15 AM |
| Water in crankcase - bilge flooded part way up engine | cvile1617 | Troubleshooting | 18 | 04-13-2015 08:52 PM |
| Removing the engine from your boat | Don Moyer | General Interest | 13 | 06-27-2008 11:06 AM |
| Engine dies after it warms | toscaindub | Troubleshooting | 2 | 08-13-2005 03:39 PM |
Hybrid Mode
