Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Links of Particular Interest

Reply
 
Thread Tools Display Modes
  #1   IP: 174.113.177.169
Old 05-16-2011, 09:22 PM
chrish123 chrish123 is offline
Senior Member
 
Join Date: Nov 2009
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Line Drawings or measurements

Greets:

Looked everywhere and just can seem to find it. Does anyone have a reference or URL to a measured line drawing for the A-4. Its a typical drawing that shows the engines dimensions from different angles. What Im looking for specifically is the measurements of the engine mounts relative to direct drive output to the drive shaft.

Many thanks

/ch
Reply With Quote
  #2   IP: 174.113.177.169
Old 05-16-2011, 09:46 PM
chrish123 chrish123 is offline
Senior Member
 
Join Date: Nov 2009
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Found it on line....got lucky this time....

See: http://www.engines1.com/images/weste...c_4_2_0001.jpg

/ch
Reply With Quote
  #3   IP: 174.65.53.170
Old 05-19-2011, 12:33 AM
jpian0923's Avatar
jpian0923 jpian0923 is offline
Afourian MVP
 
Join Date: Sep 2010
Location: San Diego
Posts: 976
Thanks: 0
Thanked 2 Times in 2 Posts
check this out too.
http://shop.torresen.com/utility/inc...als/200156.pdf
__________________
"Jim"
S/V "Ahoi"
1967 Islander 29
Harbor Island, San Diego
2/7/67 A4 Engine Block date
Reply With Quote
  #4   IP: 66.190.37.153
Old 05-19-2011, 07:05 AM
Laker Laker is offline
Senior Member
 
Join Date: Sep 2010
Location: Sheboygan wis.
Posts: 454
Thanks: 2
Thanked 3 Times in 3 Posts
Side question :
I see from the table of data that the Utility 4 had larger displacement and longer stroke , but less horsepower. How is that ..? Lower compression?
__________________
1966 Columbia 34 SABINA
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Why not switch fuel line from copper to A1 hose? rigspelt Fuel System 14 10-04-2012 07:49 AM
Line Drawings or measurements chrish123 General Maintenance 1 05-16-2011 09:46 PM
Caught a line around prop: Did I damage my reversing gear? ernst Reversing Gear 8 12-06-2010 05:13 PM
Air in fuel line? capt mark Fuel System 3 02-24-2010 05:48 PM
Is the electric fuel pump supposed to be able to aspirate/suck gas thru a dry line? DickBennett Fuel System 16 07-07-2009 09:48 AM


All times are GMT -4. The time now is 02:23 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved