Atomic Four Parts Engine for sale

[Chappy]

Hey everybody,
I am selling my 1973 Automic Four Series II that came out of my Catalina 27'
It has been totally torn down and cleaned,
it is completely apart, it needs a cyl head, and exhaust manifold.
Other than that everything is in fine shape.
Block has been tested and passed, no weakness or damage to block.
Engine is sitting on pallet with all parts labled and packed in a crate to be shipped.
I'm asking $300. OBO for it.
Buyer pays shipping.
Make offers please,
Thank you and God Bless

[Mark Millbauer]

Where are you located Chappy?

Mark
C27 "Solution"

[Mattmon]

Broken crankshaft!

I have late model A4 with a broken crank. Would love to rebuild this motor as a learning project as it is the same as is installed in my Pearson 30 but money is a problem. Does anyone want to sell me a crankshaft so I can get this project going? Annapolis md.

[BryanLee]

Hi MattMon,

I have a spare crank here, but I am not sure if it is any good as it has some rust on one of the main journals. I do not know if a machine shop could clean it up or not, perhaps with oversized bearings it could be ground down and used.

I also have another "parts" engine that came with my boat, all the external peices are removed, but the block has not been opened yet. The crank in there might be in better shape, and I'd be happy to sell it. If your interested, I could get it out in the next day or two and take a look.

Here's some pics of the crank I have out now... perhaps someone else will chime in on whether it is salvageable or scrap metal.

[hanleyclifford]

That crank is probably OK but get some oil on it ASAP! Sop it down with oil and store it high and dry in plastic.

[BryanLee]

I love it when people get to point out the obvious because I totally missed it Now well sopped in oil, rather then sitting around trying to get even more damaged, like I should have done a long time ago... DOH!

May be I'll go ahead and haul it to the shop to see what they can do.

Thanks!

[Chappy]

Engine location

Mark,
I am located in Rockland , Me
The engine is all torn down to the bare base.
it has been cleaned and block has been tested, no weakness or cracks / no damage.
I'm selling because i sold the boat and no longer need the engine.
was in the middle of rebuild when i sold the boat.
and since it was apart the people didnt want to mess with rebuilding it.
there are pictures of how it looked when it was still in the boat on my other post.
anyone who is interested please call me at 207-593-6044
thank you all very much
and God Bless

[Chappy]

engine.

also if folks want to buy just parts i am open to offers as well.
if anyone wants the entire engine, thats fine, if you just want parts let me know, make offers and we will get ya what ya need , i am reasonable... don't be afraid to ask. thanks

[Mattmon]

Thanks BryanLee,

I would like to take that crank off your hands. How do we do this? Phone numbers?

[weremeer]

I need a tranny

Do you have the tranny? How Much?

[BryanLee]

Mattmon, I sent you a private message, just letting you know here as they can be hard to notice if you do not know to look for them

Thanks,
Bryan

[Chappy]

Hey all

If any of you are interested, I will sell of parts instead of the entire engine.
Let me know what your lookingn for and make me an offer.
Thanks

[Will Jacocks]

PM sent. Please let me know.

[Solitaire]

Chappy

Left you a message on the 207-593-6044 # you posted earlier. Please give me a call to discuss the A-4 you are selling. Thanks.

[Moondancer]

Still Looking for a Crank?

mattmon, are you still looking for a crank?

I have a good crank, no corrosion or signs of wear on the journals. One thread where the flywheel nuts attach is a little buggered. I can get pictures if you need them.