Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Specialty Tools

Reply
 
Thread Tools Display Modes
  #1   IP: 12.199.102.194
Old 06-28-2019, 01:07 PM
tenders tenders is online now
Afourian MVP
 
Join Date: May 2007
Location: Harlem YC, City Island, NY
Posts: 1,317
Thanks: 28
Thanked 175 Times in 114 Posts
Harbor Freight find: Oscillating Multi-Tool (use as a saw)

These are $20 if you find a good coupon:
https://www.harborfreight.com/oscill...ool-62866.html

Cheaply built? Yes.
Noisy? Yep.
Vibrate like crazy? Ya, mon.
Useful? VERY VERY.

It’s called a “multi tool” and I guess it can be used for sanding, as it’s shown in the photo, but I have a standalone sander like it and hardly ever use it.

The killer app for this is as a SAW. It copies a very expensive tool originally made by Fein for which the patent ran out in the early 2010s. For this reason it was somewhat of a specialty item and you might not be too familiar with it. However, the trick with the HF version is to ignore the noise and vibration the unit makes and buy decent BIMETALLIC saw blades at your local big box store or online. It is wicked good for plunge cutting (cutting directly into the middle of something, like a drill, rather than cutting from an edge, as a band saw requires).

It cuts through:
* Stainless fasteners (and of course mild steel)
* Rusted nuts
* Fiberglass
* Replacement foam core
* G10, within reason
* Aluminum, even better than you’d expect
* Semicured epoxy (or, of course, cured)
* Wire rope, if held taut, though maybe not cables like sidestays, although I haven’t tried
* Rope, if you’re missing a knife
* Wood, of course

And can fit:
* Most anywhere, especially after you figure out that the saw blade can be mounted at 90 degrees to the body of the saw so it can poke into all kinds of nooks and crannies.

This is almost as useful as a Sawzall, with much more finesse. I’ve found it indispensable in core repairs for scraping off residual rotten balsa core/resin after the skin has been removed, and for flush trimming epoxy-soaked replacement core jammed around the edges of repairs. It’s also handy for shearing off the ends of overlong fasteners after they’ve been bolted or screwed in.

Again: it’s $20, with a coupon, and a couple of good blades are less than $10.
Reply With Quote
The Following User Says Thank You to tenders For This Useful Post:
Administrator (06-28-2019)
  #2   IP: 24.190.16.74
Old 06-28-2019, 01:21 PM
goodoldboat's Avatar
goodoldboat goodoldboat is offline
Senior Member
 
Join Date: May 2017
Location: CT
Posts: 110
Thanks: 67
Thanked 3 Times in 3 Posts
new tool

This is exactly what used to cut the lower water pump bolt ...


It cut through before I even new it ... Great tool I use everywhere !!
__________________
S/V Gosling
Westport CT .

“Believe me, my young friend, there is nothing - absolutely nothing - half so much worth doing- as simply messing about in boats.”
― Kenneth Grahame
Reply With Quote
  #3   IP: 107.77.97.126
Old 06-29-2019, 12:17 PM
toddster toddster is offline
Senior Member
 
Join Date: Aug 2011
Posts: 477
Thanks: 9
Thanked 35 Times in 30 Posts
That has been my go-to fiberglass cutting tool for years. Although you have to recognize when the blade is starting to go. (When you start seeing smoke, you’re waaay past that point.)

Although lately I have been favoring a battery-powered version from Home Despot. (As far as I can tell, the “Rigid” and “Milwaukee” brands are identical except for livery.) There are different heads available for the battery-powered one, including sander, jig saw, and right-angle drill. It lives on the boat.

But yeah, it’s hard to beat the $20 thing.
Reply With Quote
  #4   IP: 138.207.175.58
Old 06-29-2019, 01:41 PM
Administrator's Avatar
Administrator Administrator is online now
MMI Webmaster
 
Join Date: Oct 2004
Location: Chestertown, MD (Langford Creek)
Posts: 2,002
Thanks: 1,121
Thanked 222 Times in 117 Posts
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:21 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2019 Moyer Marine Inc.

All Rights Reserved