Fuel Tank capacity in Ericson 27

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • CajunSpike
    Senior Member
    • Jan 2018
    • 240

    #31
    Just as fyi, since I posted here, I got the old tank out using information provided by Jeff Ashbury.
    The dark shade on the right lower corner, is where the leak was.
    Now to figure what to put in as a replacement, within the space I have to work with.
    Last edited by CajunSpike; 04-02-2018, 04:48 PM.
    Bill L.
    1972 Ericson 27
    Hull #61
    Atomic 4

    Comment

    • Ram41662
      Senior Member
      • Dec 2017
      • 158

      #32
      Just quick update: still haven't heard from Caswell. That kind of "quick response" makes me hesitant about their product,
      sigpic Just another Ol' Guy living the dream... :-)

      Comment

      • joe_db
        Afourian MVP
        • May 2009
        • 4474

        #33
        Originally posted by CajunSpike View Post
        Just as fyi, since I posted here, I got the old tank out.
        Now to figure what to put in as a replacement, within the space I have to work with.
        What are the dimensions?
        Joe Della Barba
        Coquina
        C&C 35 MK I
        Maryland USA

        Comment

        • CajunSpike
          Senior Member
          • Jan 2018
          • 240

          #34
          By direct measurement, the tank is 24 long, 16 wide, 10 high.

          Tank I'm replacing with is 24 long, 18.25 wide, 7.5 high.

          Will be a plastic 12 gallon Moeller product.
          Price was just over $200.

          Found 3 holes in the starboard rear lower corner of the tank.
          The holes were at the spot where the tank sat heavily on the wooden supports beneath it.
          Last edited by CajunSpike; 04-02-2018, 04:47 PM.
          Bill L.
          1972 Ericson 27
          Hull #61
          Atomic 4

          Comment

          • CajunSpike
            Senior Member
            • Jan 2018
            • 240

            #35
            Just to close out my info in this thread....

            Bottom corner of original tank. Was multiple holes and bad metal.


            Replacement Moeller tank sitting in hand built wood cradle screwed down to original wood tank supports glassed into hull. All lines and fuel gauge hooked up.

            Bill L.
            1972 Ericson 27
            Hull #61
            Atomic 4

            Comment

            Working...
            X