Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Ignition System

Reply
 
Thread Tools Display Modes
  #1   IP: 24.152.132.140
Old 09-02-2018, 10:57 PM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 9,619
Thanks: 198
Thanked 2,208 Times in 1,425 Posts
Finding TDC the easy way

A while back we had a tool concept for finding the compression stroke in a cylinder, critical when setting timing from scratch, without peering or inserting anything into the spark plug hole. Remember this?
Name:  Spark plug balloon.jpg
Views: 2653
Size:  160.4 KB

Well it struck me as a pretty cool idea so I finally got around to making one and testing it out. I sacrificed an old spark plug by breaking off the porcelain, drilling out the electrode and grinding off the arm on the bottom, added a balloon to the top, threaded it into the #1 spark plug hole finger tight only and turned the engine over by hand. Once you know you're on the compression stroke you view the crankshaft roll pin for vertical alignment.

Way cool.

Name:  002.JPG
Views: 2510
Size:  90.9 KB

Name:  004.JPG
Views: 2397
Size:  107.6 KB

Name:  006.JPG
Views: 2507
Size:  128.7 KB

Name:  008.JPG
Views: 2504
Size:  120.2 KB
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Reply With Quote
The Following 7 Users Say Thank You to ndutton For This Useful Post:
Administrator (09-03-2018), Ando (04-08-2020), DDO (04-08-2021), ED.D (09-04-2018), GregH (09-03-2018), Oldlaxer1 (09-04-2018), sastanley (09-04-2018)
  #2   IP: 141.239.218.236
Old 09-03-2018, 12:40 PM
roadnsky's Avatar
roadnsky roadnsky is offline
Afourian MVP
 
Join Date: Dec 2008
Location: Lake Mead, NV
Posts: 3,104
Thanks: 24
Thanked 467 Times in 309 Posts
Neil-
IF you decide to mass produce...
can we have a variety of color choices on the balloons?
__________________
-Jerry

'Lone Ranger'

1978 RANGER 30
Reply With Quote
  #3   IP: 24.152.132.140
Old 09-03-2018, 12:50 PM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 9,619
Thanks: 198
Thanked 2,208 Times in 1,425 Posts
Quote:
Originally Posted by roadnsky View Post
Neil-
IF you decide to mass produce...
can we have a variety of color choices on the balloons?
Yes, you may . . .
Attached Images
 
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Reply With Quote
The Following 2 Users Say Thank You to ndutton For This Useful Post:
Administrator (05-08-2020), sastanley (09-04-2018)
  #4   IP: 141.239.218.236
Old 09-03-2018, 12:52 PM
roadnsky's Avatar
roadnsky roadnsky is offline
Afourian MVP
 
Join Date: Dec 2008
Location: Lake Mead, NV
Posts: 3,104
Thanks: 24
Thanked 467 Times in 309 Posts
Quote:
Originally Posted by ndutton View Post
Yes, you may . . .
I'm ALL IN!
__________________
-Jerry

'Lone Ranger'

1978 RANGER 30
Reply With Quote
The Following User Says Thank You to roadnsky For This Useful Post:
BobMcD (09-03-2018)
  #5   IP: 67.176.202.26
Old 09-03-2018, 07:38 PM
Sam Sam is offline
Afourian MVP
 
Join Date: Apr 2010
Posts: 322
Thanks: 490
Thanked 140 Times in 109 Posts
Very cool. Only thing I can add is that on this site you will either "learn" or get "entertained".
Reply With Quote
The Following User Says Thank You to Sam For This Useful Post:
Administrator (05-08-2020)
  #6   IP: 76.66.159.112
Old 09-03-2018, 08:25 PM
GregH's Avatar
GregH GregH is offline
Afourian MVP
 
Join Date: Jun 2015
Location: Kingston, ON
Posts: 564
Thanks: 385
Thanked 103 Times in 80 Posts
Quote:
Originally Posted by Sam View Post
Very cool. Only thing I can add is that on this site you will either "learn" or get "entertained".

And that is why they call it enterlearnment!
Reply With Quote
  #7   IP: 70.186.110.20
Old 09-03-2018, 09:15 PM
CajunSpike's Avatar
CajunSpike CajunSpike is offline
Senior Member
 
Join Date: Jan 2018
Location: New Orleans, LA
Posts: 240
Thanks: 222
Thanked 41 Times in 31 Posts
You must also consider the oxygen permability of the rubber as to the accuracy of the device. More or less rubber thickness may distort the results.









:-)

Yes I'm kidding.
__________________
Bill L.
1972 Ericson 27
Hull #61
Atomic 4
Reply With Quote
  #8   IP: 108.24.164.223
Old 05-08-2020, 12:32 PM
ALMA ALMA is offline
Frequent Contributor
 
Join Date: Jun 2011
Location: Outside Philly
Posts: 8
Thanks: 0
Thanked 2 Times in 1 Post
TDC

If a Vee drive prevents a visual of TDC there is a notch in the Accessory Drive that tells TDC too-
Reply With Quote
  #9   IP: 138.207.175.104
Old 05-08-2020, 04:22 PM
Administrator's Avatar
Administrator Administrator is offline
MMI Webmaster
 
Join Date: Oct 2004
Location: Chestertown, MD (Langford Creek)
Posts: 2,198
Thanks: 1,335
Thanked 365 Times in 182 Posts
I hope that forum members will appreciate the engineering complexities at work with Neil's device.
  1. The size of the balloon at various inflated pressures/volumes. A weather balloon won't work.
  2. The elasticity of the balloon. A stainless steel balloon won't work.
  3. The influence of color. Beyond my bachelor's degree in engineering.
  4. The influence of atmospheric pressure. Ditto.
  5. The influence of oxygen permeability, as pointed out by Spike. Way beyond.

All this stuff makes my head hurt, but kudos once again to Neil.

Bill

Last edited by Administrator; 05-09-2020 at 06:48 AM.
Reply With Quote
The Following User Says Thank You to Administrator For This Useful Post:
Surcouf (05-08-2020)
  #10   IP: 24.152.132.140
Old 05-08-2020, 04:57 PM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 9,619
Thanks: 198
Thanked 2,208 Times in 1,425 Posts
On your last two considerations:

4. There is zero atmospheric influence on the indicator short of being in a perfect vacuum. It reads only the pressure delta above ambient created by the moving piston in a closed cylinder.

5. Nitrogen permeability would be a 4X greater concern considering the chemical composition of air.
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Reply With Quote
The Following User Says Thank You to ndutton For This Useful Post:
Administrator (05-08-2020)
  #11   IP: 165.225.38.121
Old 05-08-2020, 05:20 PM
Surcouf's Avatar
Surcouf Surcouf is offline
Afourian MVP, Professor Emeritus
 
Join Date: May 2018
Posts: 361
Thanks: 328
Thanked 163 Times in 123 Posts
for durability we would probably need to develop a balloon resistance test to Marvel Mistery Oil vapors too!
__________________
Surcouf
A nostalgic PO - Previously "Almost There" - Catalina 27 (1979)
Reply With Quote
  #12   IP: 32.211.28.40
Old 05-08-2020, 05:20 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
Since the air in the balloon has come thru the carb, it just might be flammable. Gives me all sorts of thoughts...
Reply With Quote
  #13   IP: 99.30.185.198
Old 05-08-2020, 05:26 PM
thatch thatch is offline
Afourian MVP
 
Join Date: Dec 2009
Location: Santa clarita, Ca.
Posts: 1,079
Thanks: 235
Thanked 257 Times in 138 Posts
Probably shouldn't go there

Al, Have you ever heard of an acetylene bomb?
Tom
Reply With Quote
  #14   IP: 155.186.124.219
Old 05-08-2020, 06:11 PM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
Tom, my dad made acetylene balloons for parties. Only he knew which ones were which on the patio. Mom would get mad so he'd blow one up near her and the laughs would start.

I did some torch silver soldering for a while. we had coffee cans on the bench with water for keeping our "prods" clean of flux. If someone was bothering me I would fill a can upside-down and when they'd come back to annoy me I'd wave the torch past a hole. After the second time I moved the fluorescent lights a foot or so. Lots of can dents over my bench!

Dave Neptune
Reply With Quote
  #15   IP: 99.30.185.198
Old 05-08-2020, 06:15 PM
thatch thatch is offline
Afourian MVP
 
Join Date: Dec 2009
Location: Santa clarita, Ca.
Posts: 1,079
Thanks: 235
Thanked 257 Times in 138 Posts
Dave, I was pretty sure that you would have played with them.
Tom
Reply With Quote
  #16   IP: 155.186.124.219
Old 05-09-2020, 10:05 AM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
Tom, I just could not resist .

Dave Neptune
Reply With Quote
  #17   IP: 137.103.82.227
Old 05-09-2020, 12:33 PM
joe_db's Avatar
joe_db joe_db is offline
Afourian MVP
 
Join Date: May 2009
Posts: 4,474
Thanks: 49
Thanked 1,026 Times in 721 Posts
Quote:
Originally Posted by ndutton View Post
A while back we had a tool concept for finding the compression stroke in a cylinder, critical when setting timing from scratch, without peering or inserting anything into the spark plug hole. Remember this?

Well it struck me as a pretty cool idea so I finally got around to making one and testing it out. I sacrificed an old spark plug by breaking off the porcelain, drilling out the electrode and grinding off the arm on the bottom, added a balloon to the top, threaded it into the #1 spark plug hole finger tight only and turned the engine over by hand. Once you know you're on the compression stroke you view the crankshaft roll pin for vertical alignment.

Way cool.

That looks like a fun project It certainly will keep you from finding TDC on the exhaust stroke
Reply With Quote
  #18   IP: 32.211.28.40
Old 05-09-2020, 10:29 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
Well, this has been an amusing thread!
Just what I needed during this isolation. Spring trip to NOLA cancelled, instead we got to visit Loch Down. I hear that even Nessie is now in Loch Down.
So, all this is just to keep from putting your thumb over the spark plug hole?
No, the idea of acetylene balloons is new to me. Haven't tried one. Do they make your voice funny??
Another week or two of this and we can start a thread on vegetable guns. I've still got my potato cannon out in the shed - SpudZooka! I had the design for a radish pistol, but never made one.
Reply With Quote
  #19   IP: 24.152.132.140
Old 05-09-2020, 11:04 PM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 9,619
Thanks: 198
Thanked 2,208 Times in 1,425 Posts
One thing I noticed with the balloon indicator - - you can turn the engine very slowly by hand and still get a good indication. Oh yeah, you can turn the engine with TWO hands.
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Reply With Quote
  #20   IP: 166.170.14.22
Old 05-13-2020, 01:48 PM
Theodore's Avatar
Theodore Theodore is offline
Member
 
Join Date: Oct 2015
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Atomic 4 compression

Good Neil

Very interesting post a learning experience, thank you.

Question:
So once the balloon has expanded you are/may be at Top Dead Center with the #1 piston, what I want to confirm is are you on the compression stroke?

I just replace all the valves on my atomic 4 and I have little to zero compression. Before I did this job I had (70, 80, 70,60) so I am trying to find out if since I have re-adjusted the valves on the compression stroke which I am having a difficult time trying to figure out, that I have or have not set the valves on the compression stroke.

When I first set the valves I use a pencil in the #1 sparkplug hole to find (top dead center) TDC but didn't know if I were on the compression stroke.
Reply With Quote
  #21   IP: 100.40.58.241
Old 05-13-2020, 02:33 PM
jcwright jcwright is offline
Afourian MVP
 
Join Date: Jul 2012
Posts: 158
Thanks: 5
Thanked 99 Times in 75 Posts
Hello Theodore.

Here are Don Moyer's instructions for finding TDC, from one of his FAQ documents.

Jack

"The TDC position of the No. 1 cylinder is most easily found by holding a finger over the spark plug hole in the first cylinder, while manually turning the flywheel counterclockwise. As soon as compression is felt, stop turning and look at the position of the roll pin in front of the crankshaft. Continue turning until the roll pin is perfectly vertical. The piston will then be at TDC."
Reply With Quote
  #22   IP: 165.225.38.121
Old 05-13-2020, 02:36 PM
Surcouf's Avatar
Surcouf Surcouf is offline
Afourian MVP, Professor Emeritus
 
Join Date: May 2018
Posts: 361
Thanks: 328
Thanked 163 Times in 123 Posts
TDC demonstration by the Master

https://www.youtube.com/watch?v=2ysFGcm8oNo&t=531s
__________________
Surcouf
A nostalgic PO - Previously "Almost There" - Catalina 27 (1979)
Reply With Quote
  #23   IP: 155.186.124.219
Old 05-13-2020, 05:08 PM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
Theodore, first welcome to the MMI Afourian forum.

Note that if the valves a to tight from your adjustment position of the crank & cam the valves may not be seating and thus no compression. Finding TDC without the valves seating for compression can still be done. It is a bit more "engaging" but doable by watching the valves through the side plate.

Dave Neptune
Reply With Quote
  #24   IP: 24.152.132.140
Old 05-13-2020, 05:39 PM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 9,619
Thanks: 198
Thanked 2,208 Times in 1,425 Posts
Quote:
Originally Posted by Theodore View Post
Question:
So once the balloon has expanded you are/may be at Top Dead Center with the #1 piston, what I want to confirm is are you on the compression stroke
The balloon is not an accurate enough method to be a TDC finder but more of a compression stroke indicator. If you have no compression on #1 you can use it on any of the remaining 3 cylinders to find their respective compression stroke, just be sure to set the timing on the corresponding distributor position.

If you have zero compression on all 4 cylinders, the balloon tool is worthless.
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Reply With Quote
  #25   IP: 166.137.8.27
Old 05-14-2020, 12:42 AM
Theodore's Avatar
Theodore Theodore is offline
Member
 
Join Date: Oct 2015
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Atomic 4 compression

Hello jcwright,

Unfortunately I can't do both at the same time but I will see if I can incorporate a friend to assist me with doing this procedure. I email back forth with Don Moyer in finding the TDC, by putting a pencil in the #1 sparkplug and watch the pencil rise to confirmed TDC, then set the valves to spec. Which I did but not knowing if I am on the compression stroke or not. I am going to contact Don again after I check the compression once again since I got the engine timed. I thought that maybe I tried to adjust the distributer while I have the engine in forward gear and get RPM up and I might get some compression because I have zero rise RPM when in forward gear when I put the throttle full open, which why I think my compression or valves may not be correct, unless I have a whole different issue.

Thanks for your advice.
Ted Gladden

Last edited by Theodore; 05-14-2020 at 12:47 AM. Reason: add more info
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Finding TDC (top dead center) jpian0923 Drawings and Schematics 4 09-18-2016 06:25 PM
Easy distributor question positron Ignition System 15 03-15-2012 05:29 PM
Finding the waterline while inside the boat ILikeRust Exhaust System 15 09-14-2011 01:30 PM
If torqueing was easy , Laker General Interest 14 01-27-2011 02:51 PM
Finding TDC: how critical to be precise? rigspelt Overhaul 4 12-15-2008 05:04 AM


All times are GMT -4. The time now is 09:07 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved