#1
IP: 71.185.36.87
|
|||
|
|||
Shift lever Plate failed
Hi, I have a tartan 27, with rebuilt (by Don) A4.
Original morse shift lever , side mounted in cockpit. Yesterday when I pushed into forward, the lever just flopped forward, turned out the metal plate on back side of cockpit corroded entirely where all the bolts held it to the lever - It's still got a part number on it!( B35609A) Can a replacement plate be found? Should I get someone to machine one? Are there replacements? I see that teleflex has taken over Morse, and do offer a side mount control for a few hundred bucks, but I'm looking to get this done for less than that. Any thoughts? Thanks, Bob Scott |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Shift Lever loose/stripped cross shaft | rth365 | Drive Train / Propellers | 5 | 03-29-2011 10:13 AM |
replace shift and throttle lever | fixxxer0 | General Interest | 0 | 08-16-2007 04:07 PM |
shift lever housing is broken | kdpaine@kdpaine.com | General Interest | 2 | 06-03-2007 03:59 PM |
Shift cable/shift lever question. | Badger, C-27, N.H. | General Maintenance | 3 | 06-25-2006 08:39 PM |
Shift lever Stuck? | Getaway | Troubleshooting | 0 | 04-28-2006 04:45 PM |