#1
IP: 172.250.158.136
|
|||
|
|||
Tons of spare parts.
I bought a spare A4 off Craig’s list that I used a few parts from to get the A4 in my boat running. Well I just sold that boat and don’t have any use for all my spare parts. I’ll sell and ship any part for cheep. I’ll have anything tested or checked at a local shop before shipping if you want. Anything left over I’ll take to recycling.
Things I have: carb, just rebuilt 2 35amp Alt. Checked good at the shop. Distributor with electronic ignition. Starter Flywheel wheel and cover Accessory drive Crank and cam Pistons and rods Reversing gear and all hardwear for it. 2 water pumps. All offers considered. Tell me what you want and i’ll send you pics of it. Last edited by Flyingmike; 01-24-2018 at 11:12 AM. Reason: Update on what I have. |
#2
IP: 76.7.101.46
|
||||
|
||||
Other than the head are any of the other parts for a early model?
Dan S/V Marian Claire |
#3
IP: 172.250.158.136
|
|||
|
|||
No, it’s all late except the head.
|
#4
IP: 76.7.101.46
|
||||
|
||||
I am interested in the early head. Please send pics and any other info. Has it been magnafluxed?
Dan S/V Marian Claire |
#5
IP: 73.202.28.27
|
|||
|
|||
Parts
Im interested in pistons and ring set. Do you have standard or oversize parts.
I need set of 0.020 oversize |
#6
IP: 73.202.28.27
|
|||
|
|||
Parts
Interested in some parts that I need to overhaul my Atomic 4 late model.
If you have set of 4 pistons oversize 0.020 and same size set of rings, please, let me know, I really need it ASAP |
#7
IP: 172.250.158.136
|
|||
|
|||
Let me get the head out of storage and I’ll post some pics of it. It hasn’t been magna fluxed, I’m more than happy to take it to a machine shop and have it done though.
|
#8
IP: 172.250.158.136
|
|||
|
|||
Pulled it out of storage and started cleaning it up and found this, I think we can skip the magnaflux.
|
#9
IP: 172.250.158.136
|
|||
|
|||
Don has a whole post about combining a late model and early model and the best features of both. I have the late-model starter with the flywheel that you can mount on an early model and according to Don the late-model starter is a better starter than early model. Just FYI.
|
#10
IP: 76.7.109.131
|
||||
|
||||
Oh well. I try and keep my spares as "plug and play" as possible and therefore always on the look out for early parts. Thanks for checking it out.
Dan S/V Marian Claire |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What spare parts to carry. | Mo | General Interest | 6 | 12-13-2014 03:31 PM |
Spare parts for ICW trip | tominny | General Maintenance | 7 | 08-28-2012 08:30 PM |
Spare Parts? | Jimmy | General Maintenance | 8 | 10-13-2011 11:13 PM |
Spare Parts | baldwinmerrill | General Interest | 16 | 10-13-2009 06:41 PM |