Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Reversing Gear

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   IP: 24.53.89.131
Old 06-02-2018, 06:12 AM
Peter's Avatar
Peter Peter is offline
Afourian MVP
 
Join Date: Jul 2016
Location: Nova Scotia, Canada
Posts: 297
Thanks: 162
Thanked 140 Times in 101 Posts
tail shaft - how much wiggle?

Hello all,

I had a leak at the rear of my reversing gear and am tackling the repair this year. So far I have lifted my engine forward into the "salon" and removed the output coupling and thrust bearing.

The spring was broken in the oil seal so I am hoping that was the root of the problem.

while i am in there i decided to replace the thrust bearing as well.

My questions.

1) Should there be any side-to-side play in the tail shaft with the output coupling removed? Mine has a fair bit of wiggle - maybe 1/4" or 3/8"?

2) Would this suggest a bum pilot bearing?

3) If so, can i remove the reversing gear with the thrust bearing plate removed?

4) Is this all covered in the reversing gear video?

Looking forward to your wise council.

Best,

Peter
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tail Shaft Compatibility between Old/New Model A4s Glennjamin19 Drive Train / Propellers 2 07-04-2016 11:39 AM
Shaft back in, how worried should I be about alignment JimF Drive Train / Propellers 9 06-23-2016 09:24 PM
Prop Shaft - where to start and end.... bradh Drive Train / Propellers 26 03-27-2016 10:42 PM
Shaft removal, cutless, stern tube replacement CalebD Drive Train / Propellers 93 02-07-2014 06:30 PM
Tail shaft for V-drive unit Pace Reversing Gear 3 05-05-2009 06:20 PM


All times are GMT -4. The time now is 06:58 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved