#1
IP: 73.41.109.158
|
|||
|
|||
clevis pin stuck?
I'm trying to replace my shifter cable, but can't get the clevis pin out. The cotter pin came out, but for the life of me I can't get the connecting pin out.
Am I just lame, or is there a trick? Is it threaded? I tried to turn and wiggle it with pliers, but it wouldn't budge. |
#2
IP: 71.208.58.235
|
||||
|
||||
if you have room, you can try using a c clamp and socket
|
The Following User Says Thank You to romantic comedy For This Useful Post: | ||
Easy Rider (06-22-2020) |
#3
IP: 165.225.38.188
|
||||
|
||||
PB blaster+soaking time, heat, brut force... no trick.
__________________
Surcouf A nostalgic PO - Previously "Almost There" - Catalina 27 (1979) |
#4
IP: 73.41.109.158
|
|||
|
|||
thanks, both. it's soaking in PB now. more "persuasive" measures will be applied next time.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stuck Valve and water in oil | AIM | Troubleshooting | 3 | 06-16-2014 11:54 PM |
How do I fix a stuck valve? | afsam94 | Drive Train / Propellers | 3 | 08-12-2012 04:53 PM |
Misc Stories and Removing that stuck temperature sensor... | marthur | General Maintenance | 5 | 07-22-2012 03:16 PM |
Clevis, turnbuckle, shackle, whatever...for trans cable | mbettman | Reversing Gear | 2 | 08-27-2007 01:39 PM |
Stuck lifters | Unregistered | Troubleshooting | 1 | 12-28-2005 06:46 AM |