Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > General Maintenance

Reply
 
Thread Tools Display Modes
  #1   IP: 184.151.231.149
Old 07-01-2018, 05:19 PM
mattlamb mattlamb is offline
New Member
 
Join Date: Jun 2018
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Sediment bowl

Hi, working on the atomic engine, sediment bowl clips are stuck /rusty.. I dont want to break it so can somone wnlighteen me , does it unscrew or is it sprung loaded,

Thanks!
Reply With Quote
  #2   IP: 172.95.97.58
Old 07-02-2018, 01:46 PM
Dave Neptune Dave Neptune is online now
Afourian MVP
 
Join Date: Jan 2007
Location: Lake Arrowhead Ca.
Posts: 3,800
Thanks: 319
Thanked 262 Times in 188 Posts
First unscrew the knob at the bottom. That will release the clamping pressure and the arm will swing out of the way. May need to soak the "knob screw" for a bit as they can get sticky.

Dave Neptune
Reply With Quote
  #3   IP: 172.95.97.58
Old 07-02-2018, 01:47 PM
Dave Neptune Dave Neptune is online now
Afourian MVP
 
Join Date: Jan 2007
Location: Lake Arrowhead Ca.
Posts: 3,800
Thanks: 319
Thanked 262 Times in 188 Posts
Matt, didn't notice so welcome to the MMI Afourian Forum.

Dave Neptune
Reply With Quote
  #4   IP: 32.211.28.40
Old 07-02-2018, 05:17 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 1,327
Thanks: 4
Thanked 142 Times in 125 Posts
Hi Matt,
Welcome to the forum - hope we can help.
The bottom of the bail has a threaded stud that sticks up towards the bowl, and carried the piece that secures the bowl. This piece has a finger wheel on it which 'might' turn without breaking off the stud. If it doesn't turn easily, pry the upper ends of the bail out of the pump body - you'll then be able to soak it in a penetrant to loosen it up.
Many of us have changed to electric fuel pumps which don't use the settling bowl. The bowl is not needed, and is just a source for a leak (not uncommon). The settling bowl is just steel, it corrodes, and makes getting a good seal rather 'iffy'. Gas leaks are not good.
Reply With Quote
  #5   IP: 207.118.20.35
Old 07-03-2018, 04:19 AM
capnward's Avatar
capnward capnward is offline
Senior Member
 
Join Date: Aug 2012
Location: Deer Harbor WA
Posts: 152
Thanks: 5
Thanked 29 Times in 24 Posts
Al is right; it is tricky getting a good seal on the sediment bowl, but it can be done. A fresh washer from Moyer may be a good move. Some of us are still waiting for our mechanical fuel pumps to leak, either into the crankcase or at the sediment bowl seal, which we are told are common occurrences. It has been 2500 hours and 20 years for me. I have yet to rebuild the pump. I firmly believe that using MMO in non-ethanol gas helps prevent the diaphragm and seals from degrading, and the inside of the bowl from corroding. Stainless steel bowls are sold by Moyer. Mechanical pumps require no wiring, fuses, or oil pressure safety switches that need to be bypassed to prime the fuel line. Priming is done by hand with the bail under the pump. I have read on this forum that mechanical pumps have better suction and can handle small air leaks in the fuel line connections; electric pumps have a harder time moving air, so an airlock in the fuel line can develop, and any air leaks in the line will also leak gas. Which is not good. So you may want to hold off on the 'upgrade' to electric. The bowl and screen are probably not needed as long as the filters are doing their job, but I have seen stuff in the bowl that got past the filters, and didn't get into the carb jets. It seems to me that the biggest advantage to an electric fuel pump is it's easier to replace.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Removal of the sediment bowl tip vindauga Fuel System 3 05-30-2016 08:24 PM
sediment bowl filter rrranch Fuel System 14 05-21-2016 10:11 AM
Sediment Bowl Washer & Ethanol Clucas Fuel System 8 05-11-2015 10:29 AM
Sediment bowl fuel filter zialater Fuel System 3 03-19-2015 01:30 AM
Fuel sediment bowl leaking Rbyham Fuel System 9 03-01-2013 07:49 AM


All times are GMT -4. The time now is 03:26 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2018 Moyer Marine Inc.

All Rights Reserved