Wiring for bench test

[Brandon_b]

Can I get some insight on what wires go where for a bench test I got the block with a bunch of cut wires I tried to wire it up I can get it to crank grinding no spark

[JOHN COOKSON]

This should help if\when you connect the wiring up.

TRUE GRIT

[Al Schober]

Hate it when that happens. Many (MANY) years ago I did my first engine job - valves in a Triumph TR-3. Finished the job and it cranked, but no spark. Finally found that one wire into the distributor with a spade lug was on the wrong side of an insulating washer. It don't take much to kill an engine!