#32
IP: 206.47.13.123
|
|||
|
|||
OK. Thanks for all the suggestions.
When I have pinched off the bypass in previous years, there appeared to be adequate flow thru the exhaust. I always had the engine warmed up, so the combination of the little hole and the partially open T-stat should have let the antifreeze through the block at a decent rate. When I get to the boat, I'll first remove the drain plug and see what comes out. Hopefully antifreeze! which would indicate that I did indeed get some into the block. But I will do the job anyhow.
__________________
Larry Bradley C&C Corvette 31 "Lady Di" Clark's Marina Gananoque, ON, Canada in the beautiful Thousand Island of the St. Lawrence River |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New Product - DC circuit replacement kit for the Atomic 4 | Don Moyer | Electrical | 9 | 05-11-2013 03:26 PM |
atomic 4 mechanics in the east end of long island? | wehrmannr@aol.com | Good Guys | 1 | 05-03-2011 08:01 AM |
atomic 4 gas engine for sailboats | FRED MIRRA | For Sale - Engines and Engine Parts | 1 | 10-14-2005 10:41 AM |
Surveying an Atomic 4 | dwight yachuk | General Interest | 4 | 04-08-2005 01:34 PM |
Low speed issue - Atomic 2 | fjoyal | Troubleshooting | 1 | 01-10-2005 11:29 PM |