After getting some water in my gas a while back, my idle jet got clogged with some gunk so I removed the carburetor for a quick cleaning. Disassembly was easy but it looks like previous owner stripped the idle jet. I soaked the entire assembly in carb cleaner then ran a bit of fishing line through the jet to push out any gunk. Put everything back together and the engine is running great. But....
I don't like the idea of having the damaged jet in there and plan to rebuild the carb when I expect to have some down time, any advice on how to extract the idle jet so I can install a new one?
I don't like the idea of having the damaged jet in there and plan to rebuild the carb when I expect to have some down time, any advice on how to extract the idle jet so I can install a new one?
Comment