View Single Post
  #21   IP: 73.104.175.170
Old 06-23-2020, 06:39 AM
srizzoa4 srizzoa4 is offline
Frequent Contributor
 
Join Date: May 2020
Posts: 7
Thanks: 8
Thanked 0 Times in 0 Posts
I was able to remove the retaining clip for the dizzy. I left the junction of the dizzy and the accessory drive soaking in PB blaster overnight. I'm hopeful that I will be able to turn it. It was completely frozen yesterday. Should I force it with channel locks? Would there be a retaining clip and a set screw as SAM states? I was told by Ken at Moyer that it is a late model. I think it's an AC Delco distributor, but it isn't exactly like in the pics as the alignment tab is not the same as in ROADNSKY's pic.

Utterly baffled as to why this engine runs.
Reply With Quote