View Single Post
  #17   IP: 71.222.3.150
Old 06-08-2018, 05:25 PM
roadnsky's Avatar
roadnsky roadnsky is offline
Afourian MVP
 
Join Date: Dec 2008
Location: Lake Mead, NV
Posts: 3,104
Thanks: 24
Thanked 467 Times in 309 Posts
Quote:
Originally Posted by Graham View Post
I have to test this personally to confirm, but others here that have installed the same coil have tested it and say it has a resistance of 3.5 ohms
Ok. IF it is under 4Ω then you'll need an external resistor.
More on that here... Start reading at Neil's post #21


Quote:
Again the only reason I did not go with MMI was that I have friends in town this weekend and needed the boat running with some confidence that I was not going to have any surprises. I'm up in Canada.
I understand and we've all been there.
Just wanted to be sure you eventually do it up right or you're in for another failure downstream.
AND usually at the worst possible time too.
__________________
-Jerry

'Lone Ranger'

1978 RANGER 30
Reply With Quote
The Following User Says Thank You to roadnsky For This Useful Post:
Graham (06-09-2018)