Thanks for everything.
I have perused the recent posts, thank you for all the help and advice. I have decided the best thing to do going forward is to strip it all down and just have a machine shop check the block for cracks and then move forward from there. If its not viable I'll be installing a new westerbeke 3.5 kW gas genset and go electric drive. I can't wait to get back at it in February. Happy New year to all!. Cheers!
PS: She is raw water cooled and has only been run in salt water off the coast of Nova scotia.
Last edited by Koerk; 01-04-2019 at 10:36 PM.
|