Quote:
Originally Posted by Dave Neptune
Shawn, you would be suprised! I have done a lot of carb work over the years, mostly modifying for performance apps. The most common thing I found in carbs that were a problem were bits of teflon tape and it came from anywhere in the fuel system and could get anywhere in the carb.
That is why I recomend Permatex #2 or second choice liquid teflon on any fuel fitting!!!!!
Dave Neptune
|
I second that Dave.
One of the shipwrights at my marina never uses teflon tape, but for a different reason. He says that it is hard to tell when a fitting has been tightened enough. He (and I) have cracked aluminum ports by over tightening.
-Steve