I'll pull the exhaust anyway to check.
My engine is direct drive...I think. This is my first Atomic so I'm still getting up to speed but the shaft comes straight out of the transmission. I'll attach a photo and you can verify that for me.
The boat was surveyed before I bought it and I don't have access to that report. However, I'll pick up a gauge and check it myself.
Finally, is there a way to start the engine at the engine so I don't have to keep climbing (with the stairs pulled out) up to the starter switch?
Rob
__________________
Rob--
"Who is staring at the sea is already sailing a little."
1968 C&C Invader 36' / Late Model Atomic4
https://www.tumblr.com/sherloch7