Quote:
Originally Posted by CajunSpike
As of this writing, I do not.
Boat was not wired that way when I got it.
Would you need a different type of sending unit to do this?
This is whats installed currently.
|
Yes, you need a different unit.
The oil pressure safety switch (OPSS) is a simple on-off switch that is open when the oil pressure is less than a certain value and and closes when the pressure exceeds that value - typically 6 PSI.
Our hosts offer one -
https://moyermarine.com/product/oil-...si-fpmp_04_46/
There is a port on the block at the aft end on the port side for installing one.
Can Neil please chime in to comment whether an OPSS is a Coast Guard/ABYC(?) requirement or not?
Peter