I will haul the boat for installation. I suspect I'll need a puller for the old prop which I am about 99% sure has never been removed. I have also noticed that I think I have an alignment problem too, so it is possible that I've ruined the cutless bearing. Visual inspection needed.
Tom gave me a good deal on this prop so I picked it up...I may not get it installed right away, but I decided not to pass up the opportunity.
Dave, the reasons you mention are exactly why I got the prop...we had a summer cruise last year that was mostly motoring..I had a bruise on the inside of my leg from the propwash!
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
Last edited by sastanley; 04-22-2010 at 09:09 PM.
|