View Single Post
  #9   IP: 100.36.65.17
Old 11-13-2019, 11:59 AM
edwardc's Avatar
edwardc edwardc is offline
Afourian MVP
 
Join Date: Aug 2009
Location: Laurel, MD
Posts: 2,509
Thanks: 153
Thanked 595 Times in 388 Posts
Quote:
Originally Posted by joe_db View Post
1. Take the water hose from the manifold off the exhaust and let it drain into the bilge or a bucket.
2. Use some combo of a shop vac and turning the engine over to remove antifreeze from the engine.
3. Apply MMO.
4. Redo the antifreeze injection. It should come out of the hose in the bilge/bucket. Remember to block the bypass.
5. If you fill up the cylinder again you have a problem. If not, not
+1 ..........
__________________
@(^.^)@ Ed
1977 Pearson P-323 "Dolce Vita"
with rebuilt Atomic-4

Reply With Quote