oil pan
Just about to remove the oil pan. Flywheel housing, exhaust manifold are removed. Aft housing is still in place.
Part 1 is drop the pan with the engine upright (on an engine stand) to contain whatever is in there (oil is drained but I'm sure there's a bit more). Can anyone give me an idea how heavy that will be? Anything special I need to know?
Part 2 is clean up the pan, repaint.
Part 3 is turn the engine upside down to inspect and install a new gasket and old pan with new screws.
Any advice about the above and what to look for gratefully received!
Thanks,
Marty
__________________
Marty
1967 Tartan 27
Bowen Island, BC
|