View Single Post
  #14   IP: 71.59.125.65
Old 03-22-2016, 05:50 PM
BadaBing's Avatar
BadaBing BadaBing is offline
Senior Member
 
Join Date: Jul 2007
Location: Little Egg Harbor NJ
Posts: 503
Thanks: 28
Thanked 16 Times in 15 Posts
Quote:
Originally Posted by ndutton View Post
Do none of you have access to the oil plug below the carburetor? It's 3/4" NPT and a 3/4" 12 point socket fits the square head perfectly. Through it you have a straight shot to the bottom of the oil pan and can fit a decent size pickup tube.
On aTartan30 the engine sits at a good angle.leaning back,, not sure how typical this might be for other boat types. Will that oil plug allow.the draining from.the back portion of the pan?
__________________
Bill
1974, Tartan 30, Unchained Melody
www.CanvasWorks.US
Reply With Quote