View Single Post
  #5   IP: 38.118.52.41
Old 06-18-2007, 11:13 AM
Don Moyer's Avatar
Don Moyer Don Moyer is offline
 
Join Date: Oct 2004
Posts: 2,811
Thanks: 0
Thanked 183 Times in 124 Posts
Todd,

If you have an Oberdorfer 202M series pump, there is a small snap ring that holds the impeller on the shaft (product number CSOB_05_66 in our online catalog at moyermarine.com). You'll find a snap ring pliers in the Specialty Tools section of the catalog to assist in removing and reinstalling the snap ring. There is no reason that you should not be able to pull the impeller and shaft out of the pump other than possibly wear on the shaft.

Don
Reply With Quote