Ok...I have a little more updated information.
I tried the voltage check at rest with the jumper.
10.7 volts on the battery side of the resistor.
5.72 volts on the coil (+) with the ignition switch on, engine not running.
Incidentally, the brand new Pertronix coil at rest also = 3.3ohms..just like the bad one.
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
|