View Single Post
  #2   IP: 99.30.185.198
Old 09-18-2019, 12:32 PM
thatch thatch is online now
Afourian MVP
 
Join Date: Dec 2009
Location: Santa clarita, Ca.
Posts: 1,079
Thanks: 235
Thanked 257 Times in 138 Posts
Hi, There is certainly enough room under the clutch pack that those pieces should not pose a problem. The rotating parts in that area are well above the bottom of the pan. I have a feeling that the adjusting screw, along with the lock washer and the magnet will "nestle" together comfortably. Actually, I have a magnetic rod, that is part of the oil pump-out plug, that picks up a considerable amount of "magnetic sludge" between oil changes. If it were my engine, I'd simply replace the adjustment locking screw, along with a new lock washer and consider it fixed,
Tom
Reply With Quote
The Following User Says Thank You to thatch For This Useful Post:
Dave Neptune (09-18-2019)