View Single Post
  #14   IP: 173.166.26.241
Old 03-06-2011, 08:09 PM
hanleyclifford's Avatar
hanleyclifford hanleyclifford is offline
Afourian MVP
 
Join Date: Mar 2010
Posts: 6,978
Thanks: 172
Thanked 280 Times in 226 Posts
Quote:
Originally Posted by Dave Neptune View Post
Hanley, why not a "O" preassure cap. I have had need of running with no praessure in a few instances. What I did was take a functiong preassure cap and drilled a 1/8 inch hole in it. It still sealed so the coolant level was maintained but without preassure. Might be what you are looking for.

Regards Dave Neptune
I had an 8 lb cap and I just cut away about 2/3 of the spring. The most pressure I've ever seen on the system is 2 lbs and did not loose any coolant.
Reply With Quote