Thread: Water in Engine
View Single Post
  #8   IP: 64.230.38.59
Old 04-03-2006, 08:41 PM
Simon Simon is offline
Senior Member
 
Join Date: Oct 2004
Location: Gatineau(Hull Sector) Que
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Water in the Engine

The grease cup that you located is on the water pump. If you look immediately aft of the grease cup which is located on the side of the water pump you should be able to locate a hose that will lead you to a thruhull fitting somewhere in the area of the bilge. If installed properly, the raw water hose intake will be fitted to either a ball valve or a gate valve. Good Luck.
__________________
Simon Croteau
"Mayreau"
Alberg 30 #236 1967
A4 early :cool:
simoncroteau@sympatico.ca
Reply With Quote