View Single Post
  #168   IP: 64.62.192.42
Old 11-15-2018, 05:16 PM
toddster toddster is offline
Senior Member
 
Join Date: Aug 2011
Posts: 490
Thanks: 10
Thanked 39 Times in 34 Posts
Quote:
Originally Posted by ndutton View Post
100% of the builders I worked for installed all the deck hardware prior to mating the hull and deck.
edit:
And 100% of the hardware was thru-bolted.
So you're saying I should give up on finding the trained monkey?

That reminds me of the exception that proves the rule. Or something. Ericson seems to have installed the hatches, both forward and companionway,with wood screws set into the upper deck skin. Albeit fairly thick portions of it. The connection was getting a bit brittle after 47 years. Replacing those with through-bolts required drilling a lot of access hole in the liner which then had to be plugged or covered with trim.
Reply With Quote