View Single Post
  #6   IP: 74.107.30.34
Old 02-13-2019, 10:32 PM
sastanley's Avatar
sastanley sastanley is offline
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
If the threads match up, typically 1/8" NPT, there is no problem cutting some length off the zinc itself. I had to do that to fit in my HX. I probably used a hacksaw or dremel tool. Which reminds me, if I can't remember what I used to cut it, I probably need to replace it!
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif

Last edited by sastanley; 02-13-2019 at 10:36 PM.
Reply With Quote