View Single Post
  #7   IP: 155.186.124.219
Old 02-12-2020, 03:59 PM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
Sculdog, if you are going to FWC I would not "acid flush" until you are setting it up. If you have knocked most of the stuff loose a vinegar soak which is far more subtle should suffice very well.

When you do convert freshen up everything and check the side plate and the diverter. The side plate can turn into a bigger job quickly if the threads are rusted out.

Dave Neptune
Reply With Quote
The Following User Says Thank You to Dave Neptune For This Useful Post:
Sculldog1 (02-13-2020)